2014年2月14日星期五

Dernières Altiris 60-DSFA680 examen pratique questions et réponses

Vous pouvez tout d'abord télécharger le démo Altiris 60-DSFA680 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Choisissez le Pass4Test, choisissez le succès de test Altiris 60-DSFA680. Bonne chance à vous.

Le test simulation Altiris 60-DSFA680 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Altiris 60-DSFA680 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Le test Altiris 60-DSFA680 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Altiris 60-DSFA680. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Selon les anciens test Altiris 60-DSFA680, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Code d'Examen: 60-DSFA680
Nom d'Examen: Altiris (Altiris Deployment Solution Foundation 6.8)
Questions et réponses: 99 Q&As

60-DSFA680 Démo gratuit à télécharger: http://www.pass4test.fr/60-DSFA680.html

NO.1 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A

Altiris   certification 60-DSFA680   60-DSFA680

NO.2 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B

Altiris   60-DSFA680   60-DSFA680   60-DSFA680 examen

NO.3 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC

Altiris examen   60-DSFA680 examen   60-DSFA680

NO.4 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF

certification Altiris   60-DSFA680   60-DSFA680

NO.5 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF

certification Altiris   60-DSFA680 examen   certification 60-DSFA680   60-DSFA680   60-DSFA680 examen

NO.6 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E

Altiris   certification 60-DSFA680   60-DSFA680

NO.7 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C

Altiris   60-DSFA680   certification 60-DSFA680   60-DSFA680

NO.8 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B

Altiris   60-DSFA680   60-DSFA680 examen

NO.9 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD

certification Altiris   certification 60-DSFA680   certification 60-DSFA680

NO.10 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A

Altiris   60-DSFA680   60-DSFA680 examen   60-DSFA680   certification 60-DSFA680   certification 60-DSFA680

NO.11 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B

Altiris   60-DSFA680 examen   certification 60-DSFA680   60-DSFA680

NO.12 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A

certification Altiris   60-DSFA680 examen   60-DSFA680 examen

NO.13 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C

Altiris   certification 60-DSFA680   60-DSFA680   60-DSFA680 examen   60-DSFA680

NO.14 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE

Altiris   certification 60-DSFA680   60-DSFA680

NO.15 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D

Altiris   60-DSFA680   60-DSFA680   60-DSFA680   60-DSFA680   certification 60-DSFA680

NO.16 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B

Altiris examen   60-DSFA680   60-DSFA680 examen   certification 60-DSFA680

NO.17 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B

certification Altiris   certification 60-DSFA680   60-DSFA680 examen   60-DSFA680 examen   60-DSFA680 examen

NO.18 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C

Altiris   certification 60-DSFA680   certification 60-DSFA680   certification 60-DSFA680

NO.19 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C

Altiris   60-DSFA680 examen   60-DSFA680

NO.20 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE

Altiris   certification 60-DSFA680   60-DSFA680 examen   60-DSFA680 examen   certification 60-DSFA680

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Altiris 60-DSFA680 très tôt. Pass4Test peut vous permettre à réussir 100% le test Altiris 60-DSFA680, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

没有评论:

发表评论