Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test CompTIA PD0-001 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Il demande les connaissances professionnelles pour passer le test CompTIA PD0-001. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat CompTIA PD0-001, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
Code d'Examen: PD0-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test CompTIA PD0-001, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test CompTIA PD0-001 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
PD0-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD0-001.html
NO.1 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA PD0-001 examen certification PD0-001 PD0-001
NO.2 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA examen PD0-001 PD0-001 certification PD0-001
NO.3 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA examen PD0-001 PD0-001 PD0-001 certification PD0-001
NO.4 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD0-001 PD0-001 PD0-001
NO.5 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
certification CompTIA PD0-001 examen PD0-001
NO.6 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
certification CompTIA PD0-001 PD0-001 examen PD0-001 examen PD0-001
NO.7 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA PD0-001 PD0-001 PD0-001 PD0-001 certification PD0-001
NO.8 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA examen PD0-001 PD0-001 PD0-001 PD0-001 examen
NO.9 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD0-001 examen PD0-001
NO.10 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA PD0-001 certification PD0-001 certification PD0-001 PD0-001 examen PD0-001 examen
NO.11 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001 examen certification PD0-001 PD0-001 PD0-001 PD0-001
NO.12 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA PD0-001 examen certification PD0-001 PD0-001 PD0-001
NO.13 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD0-001 certification PD0-001 PD0-001 examen
NO.14 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA certification PD0-001 PD0-001 examen PD0-001 examen
NO.15 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA PD0-001 PD0-001 PD0-001 PD0-001 examen
NO.16 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA examen PD0-001 PD0-001 PD0-001 PD0-001 examen
NO.17 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
certification CompTIA PD0-001 examen certification PD0-001 PD0-001 examen
NO.18 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA certification PD0-001 PD0-001 examen PD0-001 examen certification PD0-001
NO.19 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
certification CompTIA PD0-001 PD0-001
NO.20 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA PD0-001 PD0-001 examen PD0-001 PD0-001
NO.21 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA PD0-001 examen PD0-001 PD0-001 examen
NO.22 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD0-001 certification PD0-001 PD0-001 examen certification PD0-001 PD0-001
NO.23 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
certification CompTIA PD0-001 examen PD0-001 PD0-001 PD0-001
NO.24 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
certification CompTIA PD0-001 PD0-001 PD0-001
NO.25 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
certification CompTIA certification PD0-001 PD0-001 PD0-001 examen PD0-001
NO.26 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD0-001 PD0-001 PD0-001 examen PD0-001
NO.27 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD0-001 certification PD0-001 PD0-001 certification PD0-001
NO.28 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
certification CompTIA PD0-001 examen certification PD0-001
NO.29 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA PD0-001 PD0-001 examen PD0-001
NO.30 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
certification CompTIA PD0-001 PD0-001 examen PD0-001 PD0-001 PD0-001
Le test CompTIA PD0-001 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test CompTIA PD0-001. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
没有评论:
发表评论