Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Tibco TB0-120, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Tibco TB0-120 coûtant un peu d'argent.
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Tibco TB0-120 et passer le test à la première fois.
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Tibco TB0-120 est bien autorisé. Avec le certificat Tibco TB0-120, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Tibco TB0-120.
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Tibco TB0-120. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
Vous allez choisir Pass4Test après essayer une partie de Q&A Tibco TB0-120 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Tibco TB0-120.
Code d'Examen: TB0-120
Nom d'Examen: Tibco (TIBCO Enterprise Message Service™ 6 Certification Exam)
Questions et réponses: 112 Q&As
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Tibco TB0-120 de Pass4Test.
TB0-120 Démo gratuit à télécharger: http://www.pass4test.fr/TB0-120.html
NO.1 Which two actions are most likely to improve EMS server performance.? (Choose two.)
A. Adding an additional CPU to the server running EMS
B. Improving physical disk performance
C. Switching from a file-based store to a database store
D. Increasing network I/O capacity on the server
Answer: B,D
Tibco examen certification TB0-120 TB0-120 TB0-120
NO.2 An EMS server and client are receiving heartbeats. Given the following EMS server settings:
-client_timeout_server_connection = 20 seconds -server_timeout_client_connection = 10 seconds
What are two possible outcomes? (Choose two.)
A. If EMS server does not receive heartbeats from a client for a period exceeding 10 seconds, the EMS
server will close the connection.
B. If EMS server does not receive heartbeats from a client for a period exceeding 20 seconds, the EMS
server will close the connection.
C. If a client does not receive heartbeats from EMS server for a period exceeding 10 seconds, the client
will close the connection.
D. If a client does not receive heartbeats from EMS server for a period exceeding 20 seconds, the client
will close the connection.
Answer: A,D
Tibco certification TB0-120 TB0-120
NO.3 Which two statements are true about selector functions? (Choose two.)
A. A selector's conditional expression can refer to values of the message body.
B. They are available for use in the bridging functions, helping to reduce unnecessary network traffic.
C. They are useful when used in conjunction with topic browser functions.
D. They are available to control the flow of messages along a route.
Answer: B,D
Tibco TB0-120 certification TB0-120 TB0-120 examen TB0-120 examen
NO.4 Atopic sales, topic is bridged to two queues: FINANCE.Q and AUDIT.Q. Ten messages are sent on the
topic SALES.TOPIC. A consumer reads ten messages from FINANCE.Q.
How many messages are now in the AUDIT.Q?
A. zero
B. five
C. ten
D. twenty
Answer: C
Tibco TB0-120 TB0-120 TB0-120
NO.5 Which two statements are true about routing queue messages? (Choose two.)
A. Routed queue messages can travel to adjacent servers without reaching the home queue.
B. Each server in the route path must have its queue defined as global.
C. The concept of zones and hops does not apply to queue messages.
D. Queue messages can travel multiple hops.
Answer: B,C
Tibco TB0-120 certification TB0-120 TB0-120 certification TB0-120
NO.6 How does a backup fault-tolerant server detect a failure of the primary fault-tolerant server?
A. TCP heartbeats sent from the primary server
B. TCP heartbeats sent from the backup server
C. Multicast heartbeats sent from the primary server
D. Multicast heartbeats sent from the backup server
Answer: A
Tibco examen TB0-120 TB0-120
NO.7 When a single message consumer is connected with an EMS server, which action can be used to
improve message consumption?
A. Enabling automatic acknowledge of all messages by the session
B. Changing delivery mode from PERSISTENT to NON_PERSISTENT
C. Increasing the prefetch value
D. Creating another instance of EMS server
Answer: C
Tibco certification TB0-120 TB0-120 TB0-120 examen
NO.8 Which two statements are true about the listen parameter? (Choose two.)
A. The listen parameter is set in the tibemsd.conf file.
B. Multiple listen parameters can be set in the TIBCO EMS configuration file.
C. TCP is the only protocol supported in the listen parameter.
D. The listen parameter is set in the transports, conf file.
Answer: A,B
Tibco examen TB0-120 certification TB0-120 TB0-120 examen TB0-120 TB0-120 examen
NO.9 A dynamic queue named q1 has been created by an EMS client.
What will be the result of executing the following command: create queue q1?
A. The command will fail saying the queue already exists.
B. The command will fail if queue has connected receivers.
C. The command will succeed and queue will be promoted to static.
D. The command will succeed and dynamic queue will be renamed.
Answer: C
Tibco TB0-120 TB0-120 examen TB0-120
NO.10 The company naming standard states that all queue names must start with the letter C.
How can the administrator of the EMS server enforce this naming standard for dynamic queues?
A. By disabling creation of dynamic destinations in the tibemsd.conf file
B. By changing create-destination permission for users
C. By having c. > as the only entry with a wildcard in the queues.conf file
D. By setting a rule to add c. as a prefix to all dynamic queues
Answer: C
Tibco TB0-120 examen TB0-120
NO.11 Which command displays message count delivered to a queue receiver?
A. Show consumers
B. Show receivers
C. Show connections
D. Show users
Answer: A
Tibco TB0-120 TB0-120 certification TB0-120
NO.12 Which three commands will update EMS configuration files when an exclusive commit command is
issued from EMS? (Choose three.)
A. set server client trace=enabled
B. set server password=password
C. set server authorization=enabled
D. set server track_message_ids=enabled
E. set server routing=enabled
Answer: B,C,D
Tibco TB0-120 TB0-120 certification TB0-120
NO.13 Which command creates a connection factory of type queue?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
certification Tibco certification TB0-120 TB0-120
NO.14 Which two conditions can cause messages in a queue to be moved to the undelivered queue? (Choose
two.)
A. The number of delivery attempts has reached the limit defined for the queue.
B. The number of pending messages has reached the limit defined for the queue.
C. The length of time the message has been retained in the queue has exceeded the limit defined for the
queue.
D. The overflow policy for the queue has been set to discard the oldest messages.
Answer: A,C
Tibco examen certification TB0-120 TB0-120 TB0-120 examen TB0-120
NO.15 Which two statements are true about synchronous and asynchronous message consumption?
(Choose two.)
A. For synchronous consumption, the message consumer explicitly invokes a receive call on the topic or
queue.
B. The consumer can receive messages synchronously by registering a synchronous message listener to
receive the messages.
C. When asynchronously receiving messages, the consumer remains blocked until a message arrives.
D. For asynchronous consumption, a message listener can be implemented that serves as an
asynchronous event handler for messages.
Answer: B,C
certification Tibco TB0-120 certification TB0-120 certification TB0-120
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Tibco TB0-120.
