Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel PMI CA0-001 peut vous assurer à réussir 100% le test PMI CA0-001. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Beaucoup de gens trouvent difficile à passer le test PMI CA0-001, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test PMI CA0-001 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification PMI CA0-001. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test PMI CA0-001. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: CA0-001
Nom d'Examen: PMI (Certified Associate in Project Management)
Questions et réponses: 525 Q&As
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
CA0-001 Démo gratuit à télécharger: http://www.pass4test.fr/CA0-001.html
NO.1 Which type of analysis is used to examine project results through time to determine if performance is
improving or deteriorating?
A. Control chart
B. Earned value
C. Variance
D. Trend
Answer: D
PMI examen CA0-001 CA0-001 CA0-001
NO.2 Which of the following are outputs of the Monitor and Control Project Work process?
A. Requested changes, forecasts, recommended corrective actions
B. Forecasts, resources plan, bottom up estimating
C. Recommended corrective actions, cost baseline, forecasts
D. Requested changes, recommended corrective actions, project constraints
Answer: A
PMI CA0-001 CA0-001
NO.3 While implementing an approved change, a critical defect was introduced. Removing the defect will
delay the product delivery. What is the MOST appropriate approach to managing this situation?
A. Utilize the change control process.
B. Crash the schedule to fix the defect.
C. Leave the defect in and work around it.
D. Fast-track the remaining development.
Answer: A
certification PMI CA0-001 CA0-001
NO.4 Which tool or technique measures performance of the project as it moves from project initiation
through project closure?
A. Resource leveling
B. Parametric measuring
C. Pareto chart
D. Earned value
Answer: D
certification PMI CA0-001 CA0-001 certification CA0-001 certification CA0-001
NO.5 Which type of analysis is used to develop the communications management plan?
A. Product
B. Cost benefit
C. Stakeholder
D. Research
Answer: C
PMI certification CA0-001 CA0-001 CA0-001
NO.6 Who is responsible for determining which processes from the Process Groups will be employed and
who will be performing them?
A. Project sponsor and project manager
B. Project sponsor and functional manager
C. Project manager and project team
D. Project team and functional manager
Answer: C
PMI examen CA0-001 examen CA0-001
NO.7 Which of the following is an example of a risk symptom?
A. Failure to meet intermediate milestones
B. Force of nature, such as a flood
C. Risk threshold target
D. Crashing front loading or fast tracking
Answer: A
PMI certification CA0-001 CA0-001 CA0-001 CA0-001
NO.8 What is the definition of project plan execution?
A. Integrating all planned activities.
B. Performing the activities included in the plan.
C. Developing and maintaining the plan.
D. Execution of deliverables.
Answer: B
certification PMI CA0-001 CA0-001 CA0-001 examen
NO.9 Identifying major deliverables, deciding if adequate cost estimates can be developed, and identifying
tangible components of each deliverable are all part of which of the following?
A. Work breakdown structure
B. Organizational breakdown structure
C. Resource breakdown structure
D. Bill of materials
Answer: A
certification PMI CA0-001 CA0-001 CA0-001 CA0-001
NO.10 Which of the following is an example of contract administration?
A. Negotiating the contract
B. Authorizing contractor work
C. Developing the statement of work
D. Establishing evaluation criteria
Answer: B
PMI examen CA0-001 examen CA0-001 examen certification CA0-001 CA0-001 examen
NO.11 Which tool is used to develop technical details within the project management plan?
A. Expert Judgment
B. Project Management Methodology
C. Project Management Information
D. Project Selection Methods
Answer: A
PMI CA0-001 CA0-001 CA0-001
NO.12 A work package has been scheduled to cost $1,000 to complete, and was to be finished today. As of
today, the actual expenditure is $1,200 and approximately half of the work has been completed.
What is the cost variance?
A. -$700
B. -$200
C. +$200
D. +$500
Answer: A
certification PMI certification CA0-001 certification CA0-001 CA0-001 certification CA0-001
NO.13 Scope verification is PRIMARILY concerned with which of the following?
A. Acceptance of the work deliverables.
B. Accuracy of the work deliverables.
C. Approval of the scope statement.
D. Accuracy of the work breakdown structure.
Answer: A
PMI CA0-001 examen CA0-001 certification CA0-001 CA0-001
NO.14 The projectt management processes presented in the PMBOK Guide should:
A. Always be applied uniformly
B. Be selected as appropriate by the sponsor
C. Be selected as appropriate by the project team
D. Be applied based on ISO guidelines.
Answer: C
PMI examen CA0-001 examen CA0-001 CA0-001 CA0-001
NO.15 What name(s) is (are) associated with the Plan-Do-Check-Act cycle?
A. Pareto
B. Ishikawa
C. Shewart-Deming
D. Delphi
Answer: C
PMI CA0-001 CA0-001
NO.16 What is a tool to improve team performance?
A. Staffing plan
B. External feedback
C. Performance reports
D. Co-Location
Answer: D
certification PMI CA0-001 CA0-001
NO.17 The Define Scope process is in which of the following process groups?
A. Initiating
B. Planning
C. Monitoring & Controlling
D. Executing
Answer: B
PMI CA0-001 CA0-001 CA0-001 CA0-001
NO.18 Who MUST know when a risk event occurs so that a response can be implemented?
A. Customers
B. Project sponsors
C. Project management team
D. Insurance claims department
Answer: C
PMI certification CA0-001 certification CA0-001 CA0-001 examen
NO.19 As part of a mid-project evaluation, your project sponsor has asked you to provide a forecast of total
project cost. You should calculate the forecast using which of the following methods?
A. BAC
B. EAC
C. ETC
D. WBS
Answer: B
certification PMI CA0-001 certification CA0-001 CA0-001 examen
NO.20 Which of the following methods is a project selection technique?
A. Flowcharting
B. Earned value
C. Cost-benefit analysis
D. Pareto analysis
Answer: C
PMI CA0-001 CA0-001 CA0-001 CA0-001
NO.21 How is scheduled variance calculated using the earned value technique?
A. EV less AC
B. AC less PV
C. EV less PV
D. AC less EV
Answer: C
certification PMI CA0-001 examen CA0-001 examen CA0-001 examen CA0-001
NO.22 During what process is the quality policy determined?
A. Initiating
B. Executing
C. Planning
D. Controlling
Answer: C
PMI CA0-001 certification CA0-001 CA0-001 examen
NO.23 On what is project baseline development established?
A. Approved product requirements
B. Estimated project cost and schedule
C. Actual project cost and schedule
D. Revised project cost and schedule
Answer: B
PMI certification CA0-001 certification CA0-001 CA0-001 CA0-001
NO.24 What is one of the MAJOR outputs of activity sequencing?
A. Responsibility assignment matrix
B. Work breakdown structure update
C. Project network diagram
D. Mandatory dependencies list
Answer: C
PMI CA0-001 examen CA0-001 CA0-001
NO.25 Information distribution involves making needed information available to project stakeholders in a timely
manner. What is an output from information distribution?
A. Earned value analysis
B. Trend analysis
C. Project records
D. Performance reviews
Answer: C
PMI CA0-001 CA0-001 examen CA0-001 CA0-001 examen
NO.26 You are assigned to implement the project control plan. What should you do to ensure the plan is
effective and current?
A. Perform periodic project performance reviews.
B. Identify quality project standards.
C. Follow ISO 9000 quality standards
D. Complete the quality control checklist.
Answer: A
PMI examen CA0-001 CA0-001
NO.27 Which activity is an input to the select sellers process?
A. Organizational process assets
B. Resource availability
C. Change control process
D. Team performance assessment
Answer: A
PMI certification CA0-001 CA0-001 examen certification CA0-001 CA0-001
NO.28 Which of the following processes is necessary to ensure that the project employs all processes
needed to meet its requirements?
A. Perform Quality Control
B. Quality Policy
C. Perform Quality Assurance
D. Quality Planning
Answer: C
PMI CA0-001 CA0-001 certification CA0-001 CA0-001
NO.29 How is quality control performed?
A. By identifying quality standards that are relevant to the project and determining how to satisfy them.
B. By monitoring specific project results in compliance with relevant quality standards and determining
corrective actions as needed.
C. By ensuring that the entire project team has been adequately trained in quality assurance processes.
D. By applying Monte Carlo, sampling, Pareto analysis and benchmarking techniques to ensure
conformance to quality standards.
Answer: B
PMI CA0-001 CA0-001 CA0-001
NO.30 Which process occurs within the Monitoring and Controlling Process Group?
A. Cost Control
B. Quality Planning
C. Quantitative Risk Analysis
D. Cost Budgeting
Answer: A
PMI examen CA0-001 examen CA0-001 CA0-001
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test PMI CA0-001, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
没有评论:
发表评论