Il y a plusieurs de façons pour réussir le test Aruba AWMP ACMP_6.1, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Après une longue attente, les documentations de test Aruba AWMP ACMP_6.1 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Aruba AWMP ACMP_6.1 à la première fois.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Aruba AWMP ACMP_6.1. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
On peut voir que beaucoup de candidats ratent le test Aruba AWMP ACMP_6.1 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Aruba AWMP ACMP_6.1 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Aruba AWMP ACMP_6.1, Pass4Test peut offrir les Q&As des autres test Certification IT.
Code d'Examen: AWMP
Nom d'Examen: Aruba (Aruba Wireless Mesh Professional 4.2)
Questions et réponses: 103 Q&As
Code d'Examen: ACMP_6.1
Nom d'Examen: Aruba (Aruba Certified Mobility Professional 6.1)
Questions et réponses: 180 Q&As
AWMP Démo gratuit à télécharger: http://www.pass4test.fr/AWMP.html
NO.1 Consider a radio configured for 20dBm conducted power connected to a 3dbi antenna.
What is the resulting EIRP in mW?
A. 100 mW
B. 200 mW
C. 150 mW
D. 250 mW
Answer: B
certification Aruba certification AWMP AWMP examen AWMP examen
NO.2 When RSSI is increased by 6 dB, how many times approximately does the signal strength increase by?
A. 1 time
B. 2 times
C. 8 times
D. 4 times
Answer: D
Aruba AWMP AWMP AWMP examen AWMP AWMP
NO.3 In RF mathematics, 1 Watt of power equals what measurement of dBm?
A. 1
B. 10
C. 20
D. 30
E. 100
Answer: D
Aruba examen AWMP examen AWMP AWMP AWMP AWMP
NO.4 A radio with 100 mW of TX power is connected through a 50-foot cable with 3 dB of loss to an antenna
with 10 dBi of gain. What is the EIRP in mW?
A. 100 mW
B. 250 mW
C. 500 mW
D. 1 W
Answer: C
certification Aruba AWMP AWMP
NO.5 Which statement is most correct and should be considered in a typical handheld client Wi-Fi access
mesh design?
A. The upstream and downstream link budgets between clients and mesh routers are symmetrical.
B. Client devices typically broadcast at higher EIRP than mesh routers.
C. Client EIRP and receive sensitivity is generally the limiting factor for range.
D. Mesh backhaul links and client access should all be on the same channel to maximize connectivity.
Answer: C
Aruba examen AWMP examen AWMP examen AWMP examen AWMP examen
NO.6 Which statement about Equivalent Isotropically Radiated Power (EIRP) is true?
A. EIRP is the path loss from the transmitter to the receiver in dB
B. EIRP is equal to ((transmit power + antenna gain) - connector and cable loss)
C. EIRP is not important because local regulations do not limit transmit power
D. EIRP is measured in relation to a spherical isotropic radiator
Answer: B
Aruba certification AWMP AWMP AWMP
NO.7 What limit does receiver sensitivity describe?
A. the maximum RSSI to decode a packet at a specific data rate
B. the minimum RSSI to decode a packet at a specific data rate
C. the receive signal level strength, which is always the same for each rate
D. the maximum output transmit power for receivers that are in range
E. the maximum RSSI to decode a packet at a specific data rate (5 - 45.45%)
Answer: B
Aruba examen certification AWMP AWMP
NO.8 Which technical specifications of the antenna should be considered during selection of an antenna?
A. Frequency range
B. Supported data rates and modulation technologies
C. Polarization
D. Gain
E. Encryption modes
Answer: A,C,D
certification Aruba AWMP certification AWMP AWMP AWMP examen AWMP
NO.9 In an Aruba mesh design which mesh scenarios are valid?
A. Point-to-point
B. Point-to-multipoint (hub and spoke)
C. Point-to-point-to-point (linear)
D. Full mesh (redundant links)
E. All of the above
Answer: E
certification Aruba AWMP examen AWMP examen AWMP
NO.10 Which of these statements is correct in regards to Fresnel zone and mesh network design? Choose all
that apply.
A. Mesh network design does not need to account for Fresnel zone.
B. Fresnel zone clearance of at least 60% is required for mesh radio links.
C. Fresnel zone only comes into play when designing Wi-Fi client coverage.
D. Fresnel zone, Free Space Path Loss, EIRP and receive sensitivity are all factors that should be
considered.
Answer: B,D
Aruba AWMP examen AWMP certification AWMP AWMP examen
NO.11 What is the maximum percentage obstruction of the first Fresnel zone in a point to point link?
A. 35%
B. 40%
C. 50%
D. 60%
Answer: B
Aruba certification AWMP certification AWMP AWMP examen AWMP AWMP
NO.12 What is the Aruba recommended mounting arrangement for a pair of identical omnidirectional antennas
in an outdoor deployment using 802.11n?
A. Over and under
B. One horizontal and one vertical
C. Any arrangement that separates the antennas by 45 degrees
D. Install the two antennas far apart
Answer: A
Aruba certification AWMP certification AWMP certification AWMP
NO.13 What effect on RSSI does antenna polarization of the receiver cause?
A. an increase in RSSI when polarized the same as the transmitter
B. an increase in RSSI when polarized exactly opposite from the transmitter
C. no affect to the signal, if the antenna beamwidth are properly aligned.
D. no effect if the deployment is within 30 degrees latitude of the equator
Answer: A
certification Aruba certification AWMP AWMP AWMP AWMP
NO.14 Which of the following statements is the best answer regarding lightning arrestors?
A. when installing where lightning is common
B. when installing where power surges are common
C. always, because the outdoor environment is unpredictable
D. whenever the appropriate regulatory agency requires them
Answer: C
certification Aruba AWMP AWMP AWMP examen AWMP AWMP
NO.15 What are the recommended deployment scenarios for MST200.?
A. Part of a point to point link
B. Providing access to mobile clients
C. As a core node in a large mesh
D. As an edge node in a mesh
Answer: A,D
Aruba AWMP AWMP examen AWMP
没有评论:
发表评论