Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522.
Vous avez aussi la possibilité à réussir le test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Si vous traviallez dur encore pour préparer le test de Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522.
Code d'Examen: JN0-332
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))
Questions et réponses: 406 Q&As
Code d'Examen: JN0-101
Nom d'Examen: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
Questions et réponses: 190 Q&As
Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 252 Q&As
Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 393 Q&As
Code d'Examen: JN0-331
Nom d'Examen: Juniper (SEC,Specialist(JNCIS-SEC))
Questions et réponses: 131 Q&As
Code d'Examen: JN0-522
Nom d'Examen: Juniper (FXV,Associate (JNCIA-FWV))
Questions et réponses: 160 Q&As
Le Certificat Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522 est un passport rêvé par beaucoup de professionnels IT. Le test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522 pour prendre un essai.
JN0-331 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-331.html
NO.1 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D
Juniper JN0-331 examen JN0-331 JN0-331 JN0-331
NO.2 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE
Juniper examen JN0-331 examen certification JN0-331 JN0-331 examen JN0-331 examen
NO.3 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD
Juniper examen certification JN0-331 JN0-331 JN0-331 examen JN0-331 certification JN0-331
NO.4 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C
Juniper examen JN0-331 certification JN0-331
NO.5 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A
Juniper examen certification JN0-331 JN0-331 JN0-331 JN0-331 examen
NO.6 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper examen JN0-331 certification JN0-331 JN0-331 JN0-331 examen JN0-331 examen
NO.7 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper certification JN0-331 certification JN0-331 JN0-331
NO.8 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
Juniper JN0-331 JN0-331 certification JN0-331
NO.9 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D
certification Juniper JN0-331 examen JN0-331 JN0-331 examen JN0-331
NO.10 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
Juniper JN0-331 JN0-331 examen JN0-331 JN0-331 examen certification JN0-331
NO.11 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE
Juniper JN0-331 JN0-331 examen JN0-331 certification JN0-331
NO.12 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
certification Juniper JN0-331 JN0-331 examen JN0-331 examen
NO.13 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD
Juniper JN0-331 examen JN0-331 JN0-331
NO.14 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC
Juniper JN0-331 JN0-331
NO.15 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper examen JN0-331 JN0-331 JN0-331 examen
NO.16 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD
certification Juniper JN0-331 JN0-331 certification JN0-331 JN0-331 examen certification JN0-331
NO.17 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C
Juniper JN0-331 examen JN0-331 examen
NO.18 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
Juniper certification JN0-331 JN0-331 examen JN0-331 JN0-331
NO.19 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC
Juniper JN0-331 examen JN0-331 JN0-331 examen JN0-331 certification JN0-331
NO.20 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD
Juniper JN0-331 JN0-331 examen certification JN0-331
没有评论:
发表评论