Le dernier examen HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17 gratuit Télécharger

Un bon choix de l'outil à se former est le point essentiel à passer le test HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17, et les documentations à propos de rechercher le test HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Code d'Examen: HP0-J44
Nom d'Examen: HP (Advanced SAN Architecture)
Questions et réponses: 60 Q&As

Code d'Examen: HP0-J39
Nom d'Examen: HP (Designing and Implementing HP P4000 SAN Solutions)
Questions et réponses: 145 Q&As

Code d'Examen: HP2-Z19
Nom d'Examen: HP (Implementing HP Network Security Solutions)
Questions et réponses: 121 Q&As

Code d'Examen: HP2-Z18
Nom d'Examen: HP (Network Infrastructure AIS 2011)
Questions et réponses: 96 Q&As

Code d'Examen: HP2-Z17
Nom d'Examen: HP (Selling HP Enterprise Network Solutions)
Questions et réponses: 69 Q&As

Si vous êtes intéressé par l'outil formation HP HP0-J44 HP0-J39 HP2-Z19 HP2-Z18 HP2-Z17 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

HP0-J39 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J39.html

NO.1 Click the Exhibit button. Which network protocol should be enabled when using ProCurve switches in an
iSCSI storage network?
A. Mesh Protocol
B. Simple Loop Prevention Protocol
C. Rapid Spanning Tree Protocol
D. Point-to-Point Protocol
Answer: C

HP examen   HP0-J39   HP0-J39   HP0-J39   HP0-J39

NO.2 Which statements about remote copies are correct? (Select two.)
A. Remote copiescan not be mounted.
B. Remote copies are always thin provisioned.
C. Remote copies are asynchronous replicas of a volume.
D. Remote copies can be synchronous and asynchronous.
E. Remote copies are asynchronous replicas between different clusters.
Answer: B,C

HP examen   HP0-J39   HP0-J39 examen   HP0-J39   HP0-J39

NO.3 Which instance is responsible for access control?
A. cluster
B. server
C. management group
D. volume
Answer: B

certification HP   certification HP0-J39   HP0-J39   HP0-J39 examen   certification HP0-J39

NO.4 Which benefit does a virtual IP load balancing (VIPLB) initiator provide?
A. directsiSCSI communication to the least busy storage module
B. supports simultaneousiSCSI communication with multiple storage modules
C. selects the next storage module in the list foriSCSI communication
D. prefers the fastest connection foriSCSI communication
Answer: A

HP examen   HP0-J39   HP0-J39   HP0-J39 examen

NO.5 Which operating systems does the HP P4000 SAN solution support? (Select three.)
A. Solaris 9
B. OS X Leopard 10.5.5
C. HP OpenVMS 8.3
D. Novell NetWare 6.5
E. SUSE Linux Enterprise Server 10
Answer: B,D,E

HP   HP0-J39 examen   HP0-J39   HP0-J39   HP0-J39

NO.6 What is the recommended network latency on a multi-site SAN subnet?
A. below 2 ms
B. below 5 ms
C. below 9 ms
D. below 15 ms
Answer: A

HP   HP0-J39   HP0-J39 examen   HP0-J39   HP0-J39

NO.7 How does the HP P4000 SAN solution allow aggregate application performance to be increased when
capacity is added?
A. Capacity and performance are adjusted on a linear scale.
B. Application priority can be adjusted.
C. Capacity and performance are dynamically adjusted to maintain balance.
D. Capacity and performance are balanced through the configuration of expansion modules.
Answer: A

certification HP   HP0-J39   certification HP0-J39

NO.8 A design consists of an HP P4000 SAN solution installed across four sites. How many servers running
the central management console are required to manage the solution?
A. 8
B. 4
C. 2
D. 1
Answer: D

HP   certification HP0-J39   HP0-J39

NO.9 What are potential purposes to utilize snapshots? (Select two.)
A. to restore files without tape or backup software
B. to protect against unintended manual data deletion
C. to protect against disk failures
D. to protect against multiple hardware failures
E. to prevent sensitive data from modification
Answer: A,B

HP examen   HP0-J39   certification HP0-J39   certification HP0-J39   HP0-J39

NO.10 What is a major enhancement of SAN/iQ 8.5 over SAN/iQ 8.1?
A. Network RAID 1 and 10
B. Network RAID 5 and 6
C. application-managed snapshots
D. thin provisionedSmartClone
Answer: B

certification HP   HP0-J39 examen   HP0-J39   HP0-J39

NO.11 Which statements about HP P4000 SAN Network RAID levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The Network RAID level is defined per storage node.
F. The number of storage nodes in the cluster can limit the Network RAID level.
Answer: B,D,F

HP   HP0-J39   HP0-J39   HP0-J39

NO.12 What are the correct steps to create a remote copy on a P4000 G2?
A. Create the remote volume and link it to the primary volume, copy the data.
B. Create the primary volume, create the remote volume and link it to the primary volume, copy the data.
C. Create the remote volume andsnapshot, link the primary volume to the remote snapshot, copy the
data.
D. Create the primary snapshot, create the remote volume and snapshot, link it to the primary
snapshot,copy the data.
Answer: D

certification HP   HP0-J39 examen   HP0-J39 examen   HP0-J39

NO.13 At which level in HP P4000 SAN solutions is RAID configured?
A. storage node
B. volume
C. management group
D. cluster
Answer: A

HP   HP0-J39   certification HP0-J39   HP0-J39 examen

NO.14 Which HBA and iSCSI initiator combination does the iSCSI protocol support? (Select two.)
A. iSCSI HBA with TCP offload engine (TOE)
B. softwareiSCSI initiator with Fibre Channel HBA
C. softwareiSCSI initiator with InfiniBand HBA
D. iSCSI Fibre Channel HBA with TCP TOE software iSCSI initiator
E. softwareiSCSI initiator with NIC
Answer: A,E

certification HP   HP0-J39   HP0-J39   HP0-J39

NO.15 What are characteristics of device specific module MPIO (DSM MPIO)? (Select two.)
A. DSM MPIO redirectsiSCSI communication to the least busy storage node.
B. DSM MPIO communication offers better performance than non-DSM MPIO communication.
C. DSM MPIO is available for all operating systems withiSCSI support.
D. DSM MPIO provides the servers with the data mapping of each node.
E. DSM MPIO provides a set of built-in data transport security features.
Answer: B,D

HP   HP0-J39   certification HP0-J39