Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
C'est sûr que le Certificat Oracle 1Z0-048 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Oracle 1Z0-048, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Oracle 1Z0-048 peut bien tester la professionnalité de IT.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Oracle 1Z0-048. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Oracle 1Z0-048.
Code d'Examen: 1Z0-048
Nom d'Examen: Oracle (Oracle Database 10g R2: Administering RAC)
Questions et réponses: 150 Q&As
C'est pas facile à passer le test Certification Oracle 1Z0-048, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Oracle 1Z0-048 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Oracle 1Z0-048, vous allez passer le test Oracle 1Z0-048 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Oracle 1Z0-048. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
1Z0-048 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-048.html
NO.1 After migrating from a 10g R1 cluster to 10g R2, you decide to multiplex your voting disk.
Which are the two ways in which you can accomplish this task? (Choose two.)
A.You should not use symbolic links.
B.You can add additional voting disks online.
C.You must add additional voting disks offline.
D.You may use the VIPCA utility to add new voting disks.
E.You may use the command: crsctl add css votedisk
Correct:B E
Oracle 1Z0-048 1Z0-048
NO.2 After the cluster database has been successfully created, several postinstallation tasks should
be completed. Identify three of them. (Choose three.)
A.Create the ASM instance.
B.Back up the root.sh script.
C.Initialize the cluster backup procedure.
D.Set up additional required user accounts.
E.Verify the Enterprise Manager/Oracle Cluster Registry configuration by running srvctl config database
-d db_name.
Correct:B D E
Oracle 1Z0-048 1Z0-048
NO.3 You decide to implement a Data Guard configuration to support a disaster recovery plan for
your RAC database. Your primary database has all shared files and the flash recovery area is
stored on ASM disk groups. Which three options exist for storing the data guard broker
configuration files at the primary location? (Choose three.)
A.can be in any shared ASM disk group
B.can be stored on shared Raw Devices
C.must be stored on Oracle Cluster File System if a cluster file system is used
D.may be stored on any supported cluster file system if a cluster file system is used
E.must be in the same shared ASM disk group as the database data files if the broker configuration files
are stored in ASM disk groups
F.must be in the same shared ASM disk group as the Flash Recovery Area if the broker configuration files
are stored in ASM disk groups.
Correct:A B D
Oracle 1Z0-048 1Z0-048
NO.4 Which three statements regarding backup of the voting disk are true? (Choose three.)
A.On UNIX platforms, the voting disk can be backed up with the dd command.
B.A backup of the voting disk should be taken whenever an RMAN catalog reset is done.
C.A backup of the voting disk should be taken whenever a new node is added to the cluster.
D.A backup of the voting disk should be taken whenever an existing node is removed from the cluster.
E.Whenever a voting disk backup is made, the Clusterware software should be stopped on all nodes in
the cluster.
Correct:A C D
Oracle 1Z0-048 1Z0-048
NO.5 After a power failure, you noticed that one of your cluster database instances did not start
automatically, whereas all other instances came up successfully. What would you do to determine
the precise cause for the instance startup failure? (Choose three.)
A.Check the resource state by using the CRS_STAT command.
B.Check for OCR corruptions by using the OCRCHECK command.
C.Check the alert.log file that belongs to the instance that did not start.
D.Check the alert.log file that belongs to the Oracle Clusterware software.
E.Check if the Oracle Clusterware is functional by using the CRSCTL command.
F.Reboot the node where the failing instance resides to check if the problem is persistent.
G.Enable extra debugging in the Oracle Clusterware software by using the CRSCTL command.
Correct:A C D
Oracle 1Z0-048 1Z0-048
NO.6 Oracle Cluster Registry (OCR) can be recovered on a UNIX platform using which two
commands? (Choose two.)
A.ocrconfig -import /u01/logical_ocr/yesterday.ocr where yesterday.ocr is an automatically generated
OCR backup
B.ocrconfig -import /u01/logical_ocr/yesterday.ocr_exp where yesterday.ocr_exp is a logical backup
created using the ocrconfig -export command
C.cp /app/oracle/product/10.1.0/crs_1/cdata/dbclust01/day.ocr /ocfs/OCR/crs.dbf where
/ocfs/OCR/crs.dbf is the cluster registry file
D.ocrconfig -restore /app/oracle/product/10.1.0/crs_1/cdata/dbclust01/day.ocr where day.ocr is an
automatically generated OCR backup
Correct:B D
Oracle 1Z0-048 1Z0-048
NO.7 Which three storage types are suitable as a flash recovery area for an Oracle 10g RAC database?
(Choose three.)
A.Raw volume
B.ASM disk group
C.Local file system
D.Cluster file system
E.Shared NFS directory
Correct:B D E
Oracle 1Z0-048 1Z0-048
NO.8 Your company has a combination of high availability and scalability requirements that need to
be addressed, and RAC has been discussed as a solution. There are a mix of "off-the-shelf"
software products and homegrown applications currently in use in your environment that run on
single-instance Oracle databases. You have been asked by the IT director to provide an impact
analysis report to help assess the impact on applications when migrating to RAC. Which three are
among the areas that should be examined for performance impact and application functionality
impact or for both? (Choose three.)
A.applications that use large parallel full table scans
B.applications that truncate tables in a data warehouse process
C.three-tier applications that use application global context variables
D.client/server type applications that use application local context variables
E.applications that access small tables using the same index occasionally
F.applications that use SQL profiles created by the ATO optimizer in the SQL Tuning Advisor
Correct:A B C
Oracle 1Z0-048 1Z0-048
NO.9 You are running a two-instance database with six redo log groups defined and decide to add a
third thread to support a third database instance on the third node of the cluster. Which three
commands would you issue to achieve this using command line administration? (Choose three.)
A.ALTER SYSTEM ENABLE THREAD 3;
B.ALTER DATABASE ENABLE THREAD 3;
C.ALTER SYSTEM ADD LOGFILE THREAD 3 GROUP 8;
D.ALTER SYSTEM ADD LOGFILE THREAD 3 GROUP 7;
E.ALTER DATABASE ADD LOGFILE THREAD 3 GROUP 7;
F.ALTER DATABASE ADD LOGFILE THREAD 3 GROUP 8;
Correct:B E F
Oracle 1Z0-048 1Z0-048
NO.10 Which optional parameter of the DESCRIPTION clause of a TNS entry can you use to randomize
the access to available listeners?
A.FAILOVER
B.LOAD_BALANCE
C.SOURCE_ROUTE
D.TYPE_OF_SERVICE
Correct:B
Oracle 1Z0-048 1Z0-048
NO.11 Which initialization parameter would you use for each RAC instance to make sure that each
listener on each RAC node is aware of the load of all the others?
A.LOCAL_LISTENER
B.REMOTE_LISTENER
C.REMOTE_DEPENDENCIES_MODE
D.PREFER_LEAST_LOADED_NODE_
Correct:B
Oracle 1Z0-048 1Z0-048
NO.12 You are working as a DBA in a RAC environment that is available for testing. The RAC
environment has all the database files stored in the OCFS file system. You plan to install ASM and
move all the database files to ASM to achieve better performance. During the installation, you
selected redundancy level as normal for the disk group being added. What is the reason for
selecting this redundancy level?
A.You want to use hardware mirroring.
B.You do not want to have any mirroring in the disk group.
C.You have two failure groups defined, so you want to use two-way mirroring.
D.You have three failure groups defined, so you want to use three-way mirroring.
Correct:C
Oracle 1Z0-048 1Z0-048
NO.13 In a RAC environment, you see a steep increase for enq:HW - contention and gc current grant
wait events. What would you do to fix this issue?
A.Increase the cache size of sequences.
B.Reduce the time of transactions by committing more often.
C.Use larger uniform extent sizes for objects.
D.Reduce the number of updates causing locks on tables accessed by multiple instances.
Correct:C
Oracle 1Z0-048 1Z0-048
NO.14 You have a well-tuned, non-RAC single instance Oracle database with several services, all of
which perform perfectly. You plan to migrate the database to RAC in the next two weeks and all file
systems would be shared using Oracle Cluster File System. After the migration, you want to
perform a test to monitor RAC-specific tuning issues that would not have occurred on a non-RAC
database. Which six areas would you monitor to determine whether there are RAC-specific
performance problems after migration? (Choose six.)
A.Interconnect latency
B.Instance recovery time
C.Services with applications that use external tables
D.Services with applications that truncate large tables
E.Services with applications using local context variables
F.Services with query-intensive applications relying on full table scans
G.Services with insert-intensive applications that use Oracle sequences for index keys
H.Services with applications that have occasional queries, using index access on modestly sized tables
I.Services with insert-intensive applications that generate their own keys without Oracle sequences
Correct:A B D F G I
Oracle 1Z0-048 1Z0-048
NO.15 You are about to build a new Oracle Clusterware-based cluster and you want to make the
installation process as smooth as possible. You decide to use the Cluster Verification Utility
(CLUVFY) to check whether or not your system administrator has set up the hardware and system
software correctly. Which two statements about CLUVFY are true? (Choose two.)
A.You can run CLUVFY only from a privileged operating system account.
B.You can run CLUVFY directly from the Oracle Clusterware distribution media.
C.CLUVFY cannot be used until the Oracle Clusterware is installed successfully.
D.After the Oracle Clusterware installation, you can run CLUVFY from the Oracle Home that holds the
CRS binaries.
E.You have to install CLUVFY on all cluster nodes in order to use CLUVFY on other nodes than the one
from which you perform the installation.
F.To use CLUVFY during the Oracle Clusterware installation, you have to download CLUVFY from the
Oracle Technology Network (OTN) Web site and install it before you can use it.
Correct:B D
Oracle 1Z0-048 1Z0-048
NO.16 View the Exhibit, which displays the cluster database performance page after the same
workload has been executed three times on your cluster without varying any non-Oracle
workloads on the cluster. What are the two ways by which you can tell that the corresponding
application was better tuned during the second and third execution? (Choose two.)
A.There is less paging each time.
B.The run queue length is going down each time.
C.It takes less time to execute the workload each time.
D.The number of transactions per second is getting higher each time.
E.The database throughput graphic is below the red dashed line during the last execution.
Correct:C D
Oracle 1Z0-048 1Z0-048
NO.17 You have attended a user group presentation on RAC and based on what you have learned you
feel that your company would benefit from having the RAC option to meet its Oracle database
requirements in several ways. Your manager does not know much about RAC and asks you to
create a presentation to the team explaining RAC, and whether it should be implemented in your
installation. Which three statements explain the benefits and implications of RAC? (Choose three.)
A.RAC alone would not help protect from human errors.
B.RAC would increase availability in the event of data failures.
C.RAC would increase availability in the event of a network failure.
D.RAC alone would increase availability when doing release upgrades.
E.RAC would increase scalability for all application workloads in all cases.
F.RAC would increase availability in the event of node and instance failures.
G.RAC used in conjunction with parallel execution may provide speedup of DSS queries.
H.RAC used in conjunction with parallel execution may provide for speedup of OLTP workload processes.
Correct:A F G
Oracle 1Z0-048 1Z0-048
NO.18 Several steps must be followed to successfully add a new node to your cluster database.
Assuming that a UNIX platform is used, which of the three steps below are correct? (Choose
three.)
A.Add instances using OUI.
B.Reconfigure listeners for the new node with netca.
C.Configure the OS and hardware for the new node.
D.Add the node to the cluster using the addnode.sh script run from ORA_CRS_HOME.
E.Add the RAC software to the new node using addnode.sh from ORA_CRS_HOME.
Correct:B C D
Oracle 1Z0-048 1Z0-048
NO.19 Which two initialization parameters must be set to start up an ASM instance in a RAC
environment? (Choose two.)
A.INSTANCE_TYPE
B.DB_UNIQUE_NAME
C.ASM_DISKSTRING
D.ASM_DISKGROUPS
E.ASM_POWER_LIMIT
F.CLUSTER_DATABASE
Correct:A F
Oracle 1Z0-048 1Z0-048
NO.20 Your company has certain standard practices for technology and you are configuring ASM disk
groups for your four-node RAC cluster. The company guidelines suggest that there is one disk
group for the flash recovery area that is shared by all databases and a separate disk group for the
database area of all databases. Which three exceptions exist that may require you to create
additional disk groups? (Choose three.)
A.The retention policy for backups are different for different databases.
B.There are large nonpartitioned tables accessed frequently using indexes.
C.The disk farm has different disk models with different characteristics and ages.
D.Some databases operate in ARCHIVELOGMODE and others in NOARCHIVELOGMODE.
E.Some database instances are shut down every night while others are always running.
F.Applications using the databases have different Service-Level Agreements for response time and
throughput.
G.There are partitioned tables where the older partitions are in read-only tablespaces and seldom
accessed, but the more recent partitions are frequently accessed.
Correct:C F G
Oracle 1Z0-048 1Z0-048
Vous allez choisir Pass4Test après essayer une partie de Q&A Oracle 1Z0-048 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Oracle 1Z0-048.
没有评论:
发表评论