Guide de formation plus récente de Microsoft 070-565

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Microsoft 070-565. Il n'y a pas de soucis à réussir le test avec une haute note.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 070-565 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 070-565 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 070-565 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Microsoft 070-565. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Microsoft 070-565. Choisir le produit de Pass4Test particulier pour le test Certification Microsoft 070-565 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Il demande les connaissances professionnelles pour passer le test Microsoft 070-565. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Microsoft 070-565, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

La Q&A de Pass4Test vise au test Certificat Microsoft 070-565. L'outil de formation Microsoft 070-565 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Microsoft 070-565 par une seule fois, vous n'aurez pas aucune raison à refuser.

Code d'Examen: 070-565
Nom d'Examen: Microsoft (Pro: Designing and Developing Enterprise Applications Using the Microsoft .NET Framework 3.5)
Questions et réponses: 138 Q&As

070-565 Démo gratuit à télécharger: http://www.pass4test.fr/070-565.html

NO.1 }
The BusinessComponent.ProcessTransaction method will only throw exceptions from the
ApplicationException type. You plan to debug the WCF service.
You need to ensure that the WCF service meets the following requirements:
Detailed exception information is provided to the client application.
Subsequent calls can be issued to the service by using the same proxy intance after an exception is
caught in the client application.
What should you do?
A. Add the following code segment at line 08.
[ServiceBehavior(IncludeExceptionDetailInFaults=true)]
Add the following code segment at line 16.
throw appEx;
B. Add the following code segment at line 05.
[FaultContract(typeof(ApplicationException))]
Add the following code segment at line 16.
throw appEx;
C. Add the following code segment at line 08.
[ServiceBehavior(IncludeExceptionDetailInFaults=true)]
Add the following code segment at line 16.
throw new FaultException<ApplicationException>(appEx);
D. Add the following code segment at line 05.
[FaultContract(typeof(ApplicationException))]
Add the following code segment at line 16.
throw new FaultException<ApplicationException>(appEx);
Answer: D

certification Microsoft   certification 070-565   certification 070-565
18. You create a Windows Communication Foundation (WCF) application by using Microsoft Visual Studio
2008 and the .NET Framework 3.5.
You create a WCF service by using the following code segment. (Line numbers are included for reference
only.)
01 <ServiceContract()> _
02 Public Interface IContosoService
03
04 <OperationContract()> _
05 Sub ProcessTransaction()
06
07 End Interface
08
09 Public Class ContosoService
10 Implements IContosoService
11
12 Public Sub ProcessTransaction() _
Implements IContosoService.ProcessTransaction
13 Try
14 BusinessComponent.ProcessTransaction()
15 Catch appEx As ApplicationException
16
17 End Try
18 End Sub
19 End Class
The BusinessComponent.ProcessTransaction method will only throw exceptions from the
ApplicationException type. You plan to debug the WCF service.
You need to ensure that the WCF service meets the following requirements:
Provides detailed exception information to the client application.
Subsequent calls can be issued to the service by using the same proxy intance after an exception is
caught in the client application.
What should you do?
A. Add the following code segment at line 08.
<ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
Add the following code segment at line 16.
Throw appEx
B. Add the following code segment at line 06.
<FaultContract(GetType(ApplicationException))>
Add the following code segment at line 16.
Throw appEx
C. Add the following code segment at line 08.
<ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
Add the following code segment at line 16.
Throw New FaultException(Of ApplicationException)(appEx)
D. Add the following code segment at line 06.
<FaultContract(GetType(ApplicationException))>
Add the following code segment at line 16.
Throw New FaultException(Of ApplicationException)(appEx)
Answer: D

Microsoft   070-565   070-565
19. You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application design specifies the following components:
A user interface implemented as an ASP.NET 3.5 Web application
A Microsoft SQL Server 2005 database to store business data
A Windows Communication Foundation (WCF) service that authenticates users that have their
credentials stored in the SQL Server database
A business data service to transfer data between the user interface and the SQL Server database
In future releases, the application must also be able to authenticate business partners who use
non-Microsoft directory servers to store user credentials.
You need to ensure that the application design meets the extensibility requirements.
What should you do?
A. Implement the business data service as a WCF service.
B. Host the Web application on multiple load-balanced Web servers.
C. Add an abstraction layer between the user interface and the authentication service.
D. Implement database objects that store the corporate user credentials in the same SQL Server
database as the business data.
Answer: C

Microsoft   certification 070-565   070-565 examen

NO.2 Rate your level of proficiency in migrating, deploying, and maintaining an application, including creating
a deployment plan, and analyzing the configuration of the production environment, performance
monitoring data, and logs.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft   070-565   070-565   certification 070-565

NO.3 Rate your level of proficiency in stabilizing and testing an application, including defining a functional test
strategy, performing integration testing, and performing a code review.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

certification Microsoft   certification 070-565   070-565   070-565   070-565   certification 070-565

NO.4 You create a Windows Forms application by using Microsoft Visual Studio .NET 2008 and the .NET
Framework 3.5.
The application contains the following code segment.
public DataSet GetProductByID(string ProductID)
{
DataSet ds = new DataSet("ProductList");
string SqlSelectCommand = "Select * FROM PRODUCTS WHERE
PRODUCTID=" + ProductID;
try
{
SqlDataAdapter da = new SqlDataAdapter();
SqlConnection cn = new SqlConnection(GetConnectionString());
SqlCommand cmd = new SqlCommand(SqlSelectCommand);
cmd.CommandType = CommandType.Text;
cn.Open();
da.Fill(ds);
cn.Close();
}
catch (Exception ex)
{
string msg = ex.Message.ToString();
//Perform Exception Handling Here
}
return ds;
}
You need to ensure that the code segment is as secure as possible.
What should you do?
A. Ensure that the connection string is encrypted.
B. Use a StringBuilder class to construct the SqlSelectCommand string.
C. Add a parameter to the cmd object and populate the object by using the ProductID string.
D. Replace the SELECT * statement in the SqlSelectCommand string with the SELECT <column list>
statement.
Answer: C

certification Microsoft   070-565   070-565 examen   070-565 examen

NO.5 You create applications by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
You deploy a new Windows Forms application in a test environment. During the test process, an error
message that includes an incomplete stack trace is reported.
You review the following code segment that has caused the error.
public int AddNewMission(DateTime date, string mission, string missionLink)
{
try
{
DALCode pgr = new DALCode("cnWeb");
int retcode = pgr.AddNewMission(date, mission, missionLink);
return retcode;
}
catch (Exception ex)
{
throw new Exception(ex.Message);
}
finally
{
pgr.Dispose();
}
}
You need to modify the code segment to display the entire stack trace.
What should you do?
A. Remove the CATCH block.
B. Remove the FINALLY block.
C. Add a Using block to the TRY block.
D. Replace the THROW statement in the CATCH block with throw(ex).
Answer: A

Microsoft   070-565 examen   070-565

NO.6 Which of the following technologies do you use regularly? Choose all that apply.
A. Microsoft ASP.NET
B. Windows Forms
C. Windows Presentation Foundation (WPF)
D. Microsoft ADO.NET
E. Windows Communication Foundation (WCF)
F. Distributed technologies in .NET 3.5
Answer: A

Microsoft   certification 070-565   070-565 examen

NO.7 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application has a class that contains a method named NewEvent. The NewEvent method contains
the following code segment.
using (SqlConnection cn = new SqlConnection(connString))
{
SqlCommand cmd = new SqlCommand();
cmd.Connection = cn;
cmd.CommandText = "prcEvent";
cmd.Parameters.Add("@Date", SqlDbType.DateTime, 4);
cmd.Parameters.Add("@Desc", SqlDbType.VarChar, 8000);
cmd.Parameters.Add("@Link", SqlDbType.VarChar, 2048);
cmd.Parameters["@Date"].Value = date;
cmd.Parameters["@Desc"].Value = eventText;
cmd.Parameters["@Link"].Value = eventLink;
cn.Open();
retcode = cmd.ExecuteNonQuery().ToString();
}
During the test process, a user executes the NewEvent method. The method fails and returns the
following error message:
"A stored procedure named prcEvent requires a parameter named @Date."
You need to resolve the error.
What should you do?
A. Set the CommandText property of the cmd object to dbo.prcEvent.
B. Set the CommandType property of the cmd object to CommandType.TableDirect.
C. Set the CommandType property of the cmd object to CommandType.StoredProcedure.
D. Replace the ExecuteNonQuery method of the cmd object with the ExecuteScalar method.
Answer: C

certification Microsoft   070-565   070-565   070-565   070-565 examen

NO.8 Rate your level of proficiency in designing and developing an application framework, including
choosing an appropriate implementation approach for the application design logic, defining the interaction
between framework components, and defining validation and event logging strategies.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft   070-565 examen   070-565 examen   certification 070-565   070-565

NO.9 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application design specifies the following components:
A user interface implemented as an ASP.NET 3.5 Web application
A Microsoft SQL Server 2005 database to store business data
A Windows Communication Foundation (WCF) service that authenticates users that have their
credentials stored in the SQL Server database
A business data service to transfer data between the user interface and the SQL Server database
In future releases, the application must also be able to authenticate business partners who use
non-Microsoft directory servers to store user credentials.
You need to ensure that the application design meets the extensibility requirements.
What should you do?
A. Implement the business data service as a WCF service.
B. Host the Web application on multiple load-balanced Web servers.
C. Add an abstraction layer between the user interface and the authentication service.
D. Implement database objects that store the corporate user credentials in the same SQL Server
database as the business data.
Answer: C

Microsoft   070-565   070-565   070-565 examen   070-565 examen

NO.10 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application includes multiple components. The components communicate by passing messages to
each other. You are planning to update the application to meet new business requirements.
You need to document the application logic. You also need to ensure that the documentation captures the
details of the component interaction.
What should you do?
A. Use a class diagram.
B. Use a Use case diagram.
C. Use a sequence diagram.
D. Use a component diagram.
Answer: C

Microsoft examen   070-565   070-565   070-565   070-565 examen

NO.11 You create applications by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
You deploy a new Windows Forms application in a test environment. During the test process, an error
message that includes an incomplete stack trace is reported.
You review the following code segment that has caused the error.
Public Function AddNewMission(ByVal missiondate As DateTime, _
ByVal mission As String, ByVal missionLink As String) As Integer
Dim pgr As DALCode = New DALCode("cnWeb")
Try
Dim retcode As Int16 = _
pgr.AddNewMission(missiondate, mission, missionLink)
Return retcode
Catch ex As Exception
Throw New Exception(ex.Message.ToString())
Finally
pgr.Dispose()
End Try
End Function
You need to modify the code segment to display the entire stack trace.
What should you do?
A. Remove the CATCH block.
B. Remove the FINALLY block.
C. Add a Using block to the TRY block.
D. Replace the THROW statement in the CATCH block with Throw (ex).
Answer: A

Microsoft examen   070-565 examen   070-565 examen

NO.12 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application includes a component. The component will be referenced by the .NET and COM
applications.
The component contains the following code segment.
Public Class Employee
Public Sub New(ByVal name As String)
End Sub
End Class
The .NET and COM applications must perform the following tasks:
Create objects of the Employee type.
use these objects to access the employee details.
You need to ensure that the .NET and COM applications can consume the managed component.
What should you do?
A. Change the Employee class to a generic class.
B. Change the constructor to a no-argument constructor.
C. Set the access modifier of the class to Friend.
D. Set the access modifier of the constructor to Protected.
Answer: B

Microsoft   070-565   certification 070-565   certification 070-565

NO.13 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The ASP.NET application connects to a shared Microsoft SQL Server 2008 database instance.
The application requires certain changes in the relationships represented in the data. However, any
changes to the database schema can break existing applications that share the database instance.
You need to recommend a strategy that allows the application to make the required relationship changes
without affecting the underlying database schema. You also need to ensure that the strategy uses the
minimum amount of development effort.
Which strategy should you recommend?
A. Generate a model by using LINQ to SQL. Make the relationship changes to the model.
B. Generate an ADO.NET Entity Framework model. Make the relationship changes in the model.
C. Add an HTTP endpoint to SQL Server 2008 database to retrieve the data from the database in tabular
format.
D. Create a DataSet object and add a DataTable object for each table in the database. Create a
DataRelation object for each relationship required for the application.
Answer: B

Microsoft examen   070-565 examen   certification 070-565   070-565   070-565 examen

NO.14 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application will be used on personal computers and mobile-based devices.
The current application design is composed of the following three layers:
User interface layer
Business layer
Data access layer
You need to ensure that the application offers a custom experience to the end user based on the type of
device used. You also need to ensure that code duplication is avoided.
What should you do?
A. Implement different business layers for mobile-based devices and personal computers. Implement a
single service layer to expose the business layer to the user interface.
B. Implement different data access layers for mobile-based devices and personal computers. Implement a
single business layer to expose business objects to the user interface.
C. Implement different user interface layers for mobile-based devices and personal computers. Implement
a single user interface process layer to expose business objects to the user interface.
D. Implement different user interface process layers for mobile-based devices and personal computers.
Implement a single user interface to expose data by using rules from the user interface process layer.
Answer: C

Microsoft examen   070-565   070-565 examen   070-565 examen

NO.15 You create a Windows Communication Foundation (WCF) application by using Microsoft Visual Studio
2008 and the .NET Framework 3.5.
You create a WCF service by using the following code segment. (Line numbers are included for reference
only.)
01 [ServiceContract]
02 public interface IContosoService
03 {
04 [OperationContract]
05
06 void ProcessTransaction();
07 }
08
09 public class ContosoService : IContosoService
10 {
11 public void ProcessTransaction() {
12 try {
13 BusinessComponent.ProcessTransaction();
14 }
15 catch (ApplicationException appEx) {
16
17 }

NO.16 How many years of experience do you have in developing enterprise applications by using the
Microsoft .NET Framework 3.5?
A. I have not done this yet.
B. Less than 6 months
C. 6 months- 1 year
D. 1- 2 years
E. 2- 3 years
F. More than 3 years
Answer: A

certification Microsoft   certification 070-565   070-565 examen   070-565   070-565   certification 070-565

NO.17 How many years of experience do you have in developing enterprise applications by using any version
of the Microsoft .NET Framework?
A. I have not done this yet.
B. Less than 6 months
C. 6 months- 1 year
D. 1- 2 years
E. 2- 3 years
F. More than 3 years
Answer: A

Microsoft   070-565   070-565 examen   certification 070-565   070-565

NO.18 You create an ASP.NET application by using Microsoft Visual Studio .NET 2008 and the .NET
Framework 3.5.
The application uses the Session object to store data. The application is currently deployed to a single
server.
You need to ensure that the application is available in the event of failure of any single server.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Host the application in a Web farm environment.
B. Host the application in a Web garden environment.
C. Use the SQLServer mode to store the session state.
D. Use the StateServer mode to store the session state.
E. Use the Application object instead of the Session object to cache data.
Answer: AC

Microsoft examen   070-565 examen   070-565 examen   certification 070-565

NO.19 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application has a class that contains a method named NewEvent. The NewEvent method contains
the following code segment.
Using cn As SqlConnection = New SqlConnection(connString)
Dim cmd As SqlCommand = New SqlCommand()
cmd.Connection = cn
cmd.CommandText = "prcEvent"
cmd.Parameters.Add("@Date", SqlDbType.DateTime, 4)
cmd.Parameters.Add("@Desc", SqlDbType.VarChar, 8000)
cmd.Parameters.Add("@Link", SqlDbType.VarChar, 2048)
cmd.Parameters("@Date").Value = dateValue
cmd.Parameters("@Desc").Value = eventText
cmd.Parameters("@Link").Value = eventLink
cn.Open()
retcode = cmd.ExecuteNonQuery()
End Using
During the test process, a user executes the NewEvent method. The method fails and returns the
following error message:
"A stored procedure named prcEvent requires a parameter named @Date."
You need to resolve the error.
What should you do?
A. Set the CommandText property of the cmd object to dbo.prcEvent.
B. Set the CommandType property of the cmd object to CommandType.TableDirect.
C. Set the CommandType property of the cmd object to CommandType.StoredProcedure.
D. Replace the ExecuteNonQuery method of the cmd object with the ExecuteScalar method.
Answer: C

Microsoft   certification 070-565   070-565   070-565

NO.20 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application includes a component. The component will be referenced by the .NET and COM
applications.
The component contains the following code segment.
public class Employee
{
public Employee(string name)
{
}
}
The .NET and COM applications must perform the following tasks:
Create objects of the Employee type.
use these objects to access the employee details.
You need to ensure that the .NET and COM applications can consume the managed component.
What should you do?
A. Change the Employee class to a generic class.
B. Change the constructor to a no-argument constructor.
C. Set the access modifier of the class to internal.
D. Set the access modifier of the constructor to protected.
Answer: B

Microsoft   certification 070-565   certification 070-565   070-565   certification 070-565   070-565

NO.21 Rate your level of proficiency in designing application components, including creating the high-level
design of a component, defining the internal architecture of a component, and defining the data handling
for a component.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft examen   certification 070-565   certification 070-565

NO.22 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
Users access the application by using Windows-based client applications or Web-based client
applications. All client applications share common business logic to handle transaction processing
requests.
You need to ensure that the application is easy to maintain.
What should you do?
A. Create a single component and host the component on each client application.
B. Create a single component and host the component on a separate application tier.
C. Create separate components and host the components on each application tier.
D. Create separate components and host the components on each client application.
Answer: B

Microsoft   070-565   070-565

NO.23 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application will be used on personal computers and mobile-based devices.
The current application design is composed of the following three layers:
User interface layer
Business layer
Data access layer
You need to ensure that the application offers a custom experience to the end user based on the type of
device used. You also need to ensure that code duplication is avoided.
What should you do?
A. Implement different business layers for mobile-based devices and personal computers. Implement a
single service layer to expose the business layer to the user interface.
B. Implement different data access layers for mobile-based devices and personal computers. Implement a
single business layer to expose business objects to the user interface.
C. Implement different user interface layers for mobile-based devices and personal computers. Implement
a single user interface process layer to expose business objects to the user interface.
D. Implement different user interface process layers for mobile-based devices and personal computers.
Implement a single user interface to expose data by using rules from the user interface process layer.
Answer: C

Microsoft examen   070-565   070-565   070-565 examen

NO.24 }

NO.25 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The ASP.NET application connects to a shared Microsoft SQL Server 2008 database instance.
The application requires certain changes in the relationships represented in the data. However, any
changes to the database schema can break existing applications that share the database instance.
You need to recommend a strategy that allows the application to make the required relationship changes
without affecting the underlying database schema. You also need to ensure that the strategy uses the
minimum amount of development effort.
Which strategy should you recommend?
A. Generate a model by using LINQ to SQL. Make the relationship changes to the model.
B. Generate an ADO.NET Entity Framework model. Make the relationship changes in the model.
C. Add an HTTP endpoint to SQL Server 2008 database to retrieve the data from the database in tabular
format.
D. Create a DataSet object and add a DataTable object for each table in the database. Create a
DataRelation object for each relationship required for the application.
Answer: B

Microsoft examen   070-565   070-565   070-565

NO.26 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
Users access the application by using Windows-based client applications or Web-based client
applications. All client applications share common business logic to handle transaction processing
requests.
You need to ensure that the application is easy to maintain.
What should you do?
A. Create a single component and host the component on each client application.
B. Create a single component and host the component on a separate application tier.
C. Create separate components and host the components on each application tier.
D. Create separate components and host the components on each client application.
Answer: B

certification Microsoft   070-565   070-565

NO.27 Rate your level of proficiency in envisioning and designing an application, including analyzing and
refining the logical, physical, and database designs of the application.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

certification Microsoft   070-565   070-565   070-565 examen

NO.28 You create a Windows Forms application by using Microsoft Visual Studio .NET 2008 and the .NET
Framework 3.5.
The application contains the following code segment.
Public Function GetProductByID(ByVal ProductID As String) As DataSet
Dim ds As DataSet = New DataSet("ProductList")
Dim SqlSelectCommand As String = "Select * FROM PRODUCTS WHERE
PRODUCTID=" + ProductID
Try
Dim da As SqlDataAdapter = New SqlDataAdapter()
Dim cn As SqlConnection = New
SqlConnection(GetConnectionString())
Dim cmd As SqlCommand = New SqlCommand(SqlSelectCommand)
cmd.CommandType = CommandType.Text
cn.Open()
da.Fill(ds)
cn.Close()
Catch ex As Exception
Dim msg As String = ex.Message.ToString()
'Perform Exception Handling Here
End Try
Return ds
End Function
You need to ensure that the code segment is as secure as possible.
What should you do?
A. Ensure that the connection string is encrypted.
B. Use a StringBuilder class to construct the SqlSelectCommand string.
C. Add a parameter to the cmd object and populate the object by using the ProductID string.
D. Replace the SELECT * statement in the SqlSelectCommand string with the SELECT <column list>
statement.
Answer: C

Microsoft   070-565   070-565   070-565   certification 070-565

NO.29 You create an application by using Microsoft Visual Studio .NET 2008 and the .NET Framework 3.5.
The application includes multiple components. The components communicate by passing messages to
each other. You are planning to update the application to meet new business requirements.
You need to document the application logic. You also need to ensure that the documentation captures the
details of the component interaction.
What should you do?
A. Use a class diagram.
B. Use a Use case diagram.
C. Use a sequence diagram.
D. Use a component diagram.
Answer: C

Microsoft examen   070-565 examen   070-565 examen   070-565   070-565

Obtenez la Q&A de test Microsoft 070-565 de Pass4Test plus tôt, vous pouvez réussir le test Certification Microsoft 070-565 plus tôt.

L'avènement de la certification Microsoft pratique d'examen 083-640 questions et réponses

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Microsoft 083-640 est bien autorisé. Avec le certificat Microsoft 083-640, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Microsoft 083-640.

Pass4Test vous promet de vous aider à passer le test Microsoft 083-640, vous pouvez télécharger maintenant les Q&As partielles de test Microsoft 083-640 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le Certificat Microsoft 083-640 est un passport rêvé par beaucoup de professionnels IT. Le test Microsoft 083-640 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Microsoft 083-640. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Microsoft 083-640 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Microsoft 083-640 pour prendre un essai.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft 083-640, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Code d'Examen: 083-640
Nom d'Examen: Microsoft (TS:WindowsServer2008ActiveDirectory,)
Questions et réponses: 165 Q&As

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft 083-640. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

083-640 Démo gratuit à télécharger: http://www.pass4test.fr/083-640.html

NO.1 Your network consists of an Active Directory forest that contains one domain. All domain controllers run
Windows Server 2008 and are configured as DNS servers. You have an Active Directory-integrated zone.
You have two Active Directory sites. Each site contains five domain controllers.
You add a new NS record to the zone.
You need to ensure that all domain controllers immediately receive the new NS record. What should you
do?
A. From the DNS Manager console, reload the zone.
B. From the Services snap-in, restart the DNS Server service. C. From the command prompt, run
repadmin /syncall.
D. From the DNS Manager console, increase the version number of the SOA record.
Answer: C

Microsoft   083-640   083-640 examen   083-640 examen   083-640

NO.2 Your network consists of an Active Directory forest that contains one domain named contoso.com. All
domain controllers run Windows Server 2008 and are configured as DNS servers. You have two Active
Directory-integrated zones: contoso.com and nwtraders.com.
You need to ensure a user is able to modify records in the contoso.com zone. You must prevent the user
from modifying the SOA record in the nwtraders.com zone.
What should you do?
A. From the DNS Manager console, modify the permissions of the contoso.com zone.
B. From the DNS Manager console, modify the permissions of the nwtraders.com zone.
C. From the Active Directory Users and Computers console, run the Delegation of Control Wizard.
D. From the Active Directory Users and Computers console, modify the permissions of the Domain
Controllers organizational unit (OU).
Answer: A

certification Microsoft   083-640   certification 083-640

NO.3 Your company has a main office and a branch office. The company has a single-domain Active
Directory forest.
The main office has two domain controllers named DC1 and DC2 that run Windows Server 2008. The
branch office has a Windows Server 2008 read-only domain controller (RODC) named DC3.
All domain controllers hold the DNS Server role and are configured as Active Directory-integrated zones.
The DNS zones only allow secure updates.
You need to enable dynamic DNS updates on DC3. What should you do?
A. Run the Ntdsutil.exe > DS Behavior commands on DC3.
B. Run the Dnscmd.exe /ZoneResetType command on DC3.
C. Reinstall Active Directory Domain Services on DC3 as a writable domain controller.
D. Create a custom application directory partition on DC1. Configure the
partition to store Active
Directory-integrated zones.
Answer: C

Microsoft   083-640   certification 083-640   083-640   certification 083-640

NO.4 Your company has a DNS server that has 10 Active Directory integrated zones.
You need to provide copies of the zone files of the DNS server to the security department. What should
you do?
A. Run the dnscmd /ZoneInfo command.
B. Run the ipconfig /registerdns command.
C. Run the dnscmd /ZoneExport command.
D. Run the ntdsutil > Partition Management > List commands.
Answer: C

Microsoft   083-640   083-640   certification 083-640   083-640 examen

NO.5 You have a domain controller named DC1 that runs Windows Server 2008. DC1 is configured as a
DNS Server for contoso.com.
You install the DNS Server role on a member server named Server1 and then you create a standard
secondary zone for contoso.com. You configure DC1 as the master server for the zone.
You need to ensure that Server1 receives zone updates from DC1. What should you do?
A. On Server1, add a conditional forwarder.
B. On DC1, modify the permissions of contoso.com zone.
C. On DC1, modify the zone transfer settings for the contoso.com zone.
D. Add the Server1 computer account to the DNSUpdateProxy group.
Answer: C

Microsoft examen   certification 083-640   certification 083-640

NO.6 Your company has a single Active Directory domain named intranet.adatum.com. The domain
controllers run Windows Server 2008 and the DNS server role.
All computers, including non-domain members, dynamically register their DNS records.
You need to configure the intranet.adatum.com zone to allow only domain members to dynamically
register
DNS records.
What should you do?
A. Set dynamic updates to Secure Only.
B. Enable zone transfers to Name Servers.
C. Remove the Authenticated Users group.
D. Deny the Everyone group the Create All Child Objects permission.
Answer: A

Microsoft   083-640   083-640   083-640 examen

NO.7 You network consists of an Active Directory forest named contoso.com. All servers run Windows Server
2008. All domain controllers are configured as DNS servers. The contoso.com DNS zone is stored in the
ForestDnsZones Active Directory application partition.
You have a member server that contains a standard primary DNS zone for dev.contoso.com. You need to
ensure that all domain controllers can resolve names for dev.contoso.com.
What should you do?
A. Create a NS record in the contoso.com zone. B. Create a delegation in the contoso.com zone.
C. Create a standard secondary zone on a Global Catalog server.
D. Modify the properties of the SOA record in the contoso.com zone.
Answer: B

certification Microsoft   083-640   083-640 examen

NO.8 Your network consists of a single Active Directory domain. The domain contains 10 domain controllers.
The domain controllers run Windows Server 2008 and are configured as DNS servers.
You plan to create a new Active Directory-integrated zone.
You need to ensure that the new zone is only replicated to four of your domain controllers. What should
you do first?
A. Create a new delegation in the ForestDnsZones application directory partition.
B. Create a new delegation in the DomainDnsZones application directory partition.
C. From the command prompt, run dnscmd and specify the /enlistdirectorypartition parameter.
D. From the command prompt, run dnscmd and specify the /createdirectorypartition parameter. Answer: D

Microsoft examen   083-640   certification 083-640

NO.9 Your network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 and are configured as DNS servers. A domain controller named DC1 has a standard primary zone
for contoso.com. A domain controller named DC2 has a standard secondary zone for contoso.com.
You need to ensure that the replication of the contoso.com zone is encrypted. You must not lose any zone
data.
What should you do?
A. On both servers, modify the interface that the DNS server listens on.
B. Convert the primary zone into an Active Directory-integrated zone. Delete the secondary zone.
C. Convert the primary zone into an Active Directory-integrated stub zone. Delete the secondary zone.
D. Configure the zone transfer settings of the standard primary zone. Modify the Master Servers lists on
the secondary zone.
Answer: B

Microsoft   083-640   083-640

NO.10 Your company, Contoso, Ltd., has a main office and a branch office. The offices are connected by a
WAN link. Contoso has an Active Directory forest that contains a single domain named ad.contoso.com.
The ad.contoso.com domain contains one domain controller named DC1 that is located in the main office.
DC1 is configured as a DNS server for the ad.contoso.com DNS zone. This zone is configured as a
standard primary zone.
You install a new domain controller named DC2 in the branch office. You install DNS on DC2.
You need to ensure that the DNS service can update records and resolve DNS queries in the event that a
WAN link fails.
What should you do?
A. Create a new stub zone named ad.contoso.com on DC2.
B. Configure the DNS server on DC2 to forward requests to DC1.
C. Create a new standard secondary zone named ad.contoso.com on DC2.
D. Convert the ad.contoso.com zone on DC1 to an Active Directory-integrated zone.
Answer: D

Microsoft examen   083-640   certification 083-640   certification 083-640   083-640 examen

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Microsoft 083-640. Cet outil de formation est convenable pour les candidats de test Microsoft 083-640. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Le matériel de formation de l'examen de meilleur Microsoft 70-577

L'importance de la position de Certificat Microsoft 70-577 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Microsoft 70-577 par votre première fois.

Il y a plusieurs de façons pour réussir le test Microsoft 70-577, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Bien qu'il ne soit pas facile à réussir le test Microsoft 70-577, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Microsoft 70-577, mais encore à vous aider d'économiser votre temps.

Code d'Examen: 70-577
Nom d'Examen: Microsoft (Microsoft Windows@ Embedded Standard 2009, Development)
Questions et réponses: 75 Q&As

Pour réussir le test Microsoft 70-577 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-577. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-577 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Microsoft 70-577 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Participer au test Microsoft 70-577 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 70-577 symbole bien la professionnalité d'un travailleur dans cette industrie.

70-577 Démo gratuit à télécharger: http://www.pass4test.fr/70-577.html

NO.1 You are creating a Windows Embedded Standard run-time image. You need to create
multiple user accounts. What should you do?
A. Add multiple instances of the User Account component to the SLX file.
B. Add the Administrator Account component to multiple SLX files.
C. Use Component Designer to create a component that includes a custom security
template (.inf) file.
D. Add the User Account component to multiple SLX files.
Answer: A

Microsoft   70-577   certification 70-577   70-577 examen   70-577 examen

NO.2 You are developing a Windows Embedded Standard device that contains multiple user
accounts. You add the required number of User Account components. You need to
configure the User Account components to meet the following requirements:
Users must be able to modify the system settings.
Users must be unable to install programs that affect the system files. Which User Type
should you set?
A. Guest
B. User
C. Power User
D. Administrator
Answer: C

Microsoft   certification 70-577   70-577   70-577

NO.3 You are creating a Windows Embedded Standard run-time image. You need to identify
the file system component that meets the following requirements:
Set access level to files and folders for each user level.
Allow transparent encryption of files and directories for users and programs. Which
component should you use?
A. NTFS file system (NTFS)
B. File Allocation Table (FAT)
C. Compact Disc File System (CDFS)
D. Universal Disk File System (UDFS)
Answer: A

Microsoft examen   70-577   certification 70-577   70-577

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Microsoft 70-577 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Microsoft 70-577 qui vous amenera le succès du test Microsoft 70-577, au lieu de traivailler avec peine et sans résultat.

Microsoft MB4-641 examen pratique questions et réponses

Pass4Test est un seul site de provider le guide d'étude Microsoft MB4-641 de qualité. Peut-être que vous voyiez aussi les Q&A Microsoft MB4-641 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Selon les anciens test Microsoft MB4-641, la Q&A offerte par Pass4Test est bien liée avec le test réel.

C'est sûr que le Certificat Microsoft MB4-641 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Microsoft MB4-641, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Microsoft MB4-641 peut bien tester la professionnalité de IT.

Bien qu'il ne soit pas facile à réussir le test Microsoft MB4-641, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Microsoft MB4-641, mais encore à vous aider d'économiser votre temps.

Code d'Examen: MB4-641
Nom d'Examen: Microsoft (SL 7.0 Tools for VB)
Questions et réponses: 60 Q&As

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Microsoft MB4-641 et passer le test à la première fois.

Pass4Test peut vous fournir un raccourci à passer le test Microsoft MB4-641: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Microsoft MB4-641. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Le test Microsoft MB4-641 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft MB4-641 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft MB4-641.

MB4-641 Démo gratuit à télécharger: http://www.pass4test.fr/MB4-641.html

NO.1 If you are adding a level that accesses an existing Microsoft Dynamics SL table, most likely a
stored procedure will already have been created to support possible values lookups for that table.
What file would you search to locate a suitable stored procedure?
A. PVREC.csv
B. PVRE
C. crt C. PVREC.crp
D. PVREC. glb WArialTahomaZ
Answer: A

Microsoft   MB4-641 examen   certification MB4-641

NO.2 Which statement is true about Record Maintenance?
A. This utility program actually creates new tables in the Microsoft Dynamics SL database.
B. This utility is used to define the following properties of a table: Name, Fields and Indexes.
C. This utility lets a developer define the names of new tables. It does not actually create tables
in the Microsoft Dynamics SL database.
D. This utility reads the database schema from the Microsoft Dynamics SL database and displays
all tables in that database except for MS SQL system tables. WArialTahomaZ
Answer: C

Microsoft   MB4-641   certification MB4-641   certification MB4-641

NO.3 As Soon As the user selects a company from the Logon screen they will be connected to two
databases, an application and system database. What kind of information is contained in the
System Database? Choose the 3 that apply.
A. Product Registration
B. Accounting Information
C. Customizations
D. Users and Groups WArialTahomaZ
Answer: A, C, D

Microsoft   MB4-641 examen   MB4-641 examen   MB4-641   MB4-641 examen

NO.4 What utility can be used to create text files which contain VB Code and SQL statements that
will
create a table? The extensions of the two files that are created will be "DH", "VB" and "CRT".
A. Generate Schema
B. Record Maintenance
C. Parent.exe
D. Field Maintenance WArialTahomaZ
Answer: A

Microsoft   MB4-641 examen   certification MB4-641

NO.5 When you add new tables to the Microsoft Dynamics SL database, which restrictions must you
follow? Choose the 2 that apply.
A. Table names must not contain spaces.
B. Table names must not begin with a number.
C. Table names cannot be longer than 8 characters
D. Table names must contain a special character. WArialTahomaZ
Answer: A, B

Microsoft   MB4-641   certification MB4-641   MB4-641   MB4-641

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Microsoft MB4-641. Ce ne sera pas un problème à réussir le test Microsoft MB4-641 si vous préparez le test avec notre guide d'étude.

Le plus récent matériel de formation Microsoft MB5-858

Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft MB5-858, et les documentations à propos de rechercher le test Microsoft MB5-858 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Microsoft MB5-858. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

On doit faire un bon choix pour passer le test Microsoft MB5-858. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft MB5-858 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Microsoft MB5-858.

Dépenser assez de temps et d'argent pour réussir le test Microsoft MB5-858 ne peut pas vous assurer à passer le test Microsoft MB5-858 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

Code d'Examen: MB5-858
Nom d'Examen: Microsoft (Managing Microsoft Dynamics Implementations)
Questions et réponses: 109 Q&As

MB5-858 Démo gratuit à télécharger: http://www.pass4test.fr/MB5-858.html

NO.1 You collaborated with the Solution Sales team to strategize how to execute a Business Case
Assessment. Which customer benefits do you realize when you execute a Business Case Assessment?
Choose the 2 that apply.
A. Estimates on Return on Investment (ROI)
B. A detailed project plan
C. Total Cost of Ownership (TCO)
D. Business Process Re-engineering
Answer: A C

certification Microsoft   certification MB5-858   certification MB5-858   MB5-858 examen   MB5-858 examen
8. Your team started a pilot rollout scenario to implement and deploy a Microsoft Dynamics solution. You
notice that the customer continually adjusts the solution and that the project is not moving forward. You
are stuck in the analysis phase. How can you ensure this pilot project moves forward?
A. Adhere to a clear and strict timeline.
B. Make change requests for every adjustment that the customer makes.
C. Start new budget negotiations for the extra analysis time-spend.
D. Make extra analysis resources available to this project.
Answer: A

Microsoft examen   MB5-858   MB5-858   MB5-858
10.Before executing a Requirements and Process Review Decision Accelerator, you need to gather data
and document conditions. Which of the following are pre-conditions for this Decision Accelerator?
Choosethe 2 that apply.
A. A qualified opportunity for selling a business solution exists.
B. Customer Mission and Goals for the business solution are available.
C. Results from the Fit Gap and Solution Blueprint are available.
D. Scoping Assessment has been completed and results are available.
Answer: A B

certification Microsoft   certification MB5-858   certification MB5-858   certification MB5-858

NO.2 You need to map requirements in the Fit Gap Analysis Worksheet to appropriate categories to help
scope the level of effort required. Which of the following categorizations provide the most insights from a
project scoping and cost analysis perspective?
A. Fit, Gap
B. Finance, Sales and Marketing, Purchase, Warehouse, Manufacturing, Service, Marketing, Customer
Service
C. Critical, Non-Critical, Important, Optional, Out of scope
D. Standard Feature, Configuration, Workflow, Customization, ISV Solution, Other
Answer: D

Microsoft   MB5-858 examen   MB5-858   MB5-858   MB5-858

NO.3 A prospective customer asks your sales person to prove that the proposed solution supports the specific
industry requirements. You need to ensure due-diligence is achieved. What should you recommend?
Choose the 2 that apply.
A. A joint application design (JAD) or prototyping session where the software values/code tables are
configured or populated in the session.
B. A system test or demonstration of exactly how the software will be used at the customer site;
participants
must have an expectation that the project is still in design and feedback on key points is needed.
C. A demonstration of the software and processes through realistic Customer Business Scenarios that
include representative customer data.
D. A scripted and well prepared proof of concept.
Answer: C D

Microsoft   MB5-858   MB5-858   MB5-858   MB5-858 examen

NO.4 You selected the Standard Project Type as the most appropriate approach for successful
implementation.
Your team is engaged in the Analysis phase and they finished gathering the business requirements
after
conducting the Detailed Business Process Analysis. Which activity should the team perform next?
A. Identify and document gaps between the business solution and the customer requirements based on a
Fit Gap Analysis.
B. Begin System Configuration and ISV Solution Setup.
C. Educate the Customer's Core Implementation team by means of a Solution Overview training. D. Start
making technical and functional designs in the correct
Sure Step Design documents.
Answer: A

Microsoft   MB5-858   MB5-858   MB5-858

NO.5 You are planning a project and find that stakeholders often have varying objectives and
requirements.This makes it difficult for you to summarize a plan in a way that all objectives will be
identified or known inadvance. Your customer communicates that they expect their business priorities to
change. You are certainthat this will be a single site implementation requiring specific features and
complex customizations. Whichimplementation approach is suitable for the project?
A. Standard Project Type
B. Agile Project Project Type
C. Enterprise Project Type
D. Rapid Project Project Type
Answer: B

certification Microsoft   MB5-858 examen   MB5-858   certification MB5-858

NO.6 The sales team wants to close the sales process. They need to make sure that the scope and all other
recommendations for project execution are analyzed, documented, and agreed upon by the customer.
They are now looking for documentation that defines the formal services agreement and outlines the
engagement in enough detail that they can make a decision.
Which document can the sales team use to support the implementation proposal?
A. Statement Of Work
B. Project Charter
C. Project Plan
D. Microsoft Dynamics Pricelists
Answer: A

Microsoft examen   certification MB5-858   MB5-858   MB5-858

NO.7 You are about to roll-out a new Microsoft Dynamics implementation with no customizations and
verylimited data migration. Which activities should you plan for in the Deployment phase? Choose the 2
thatapply.
A. Conduct User Training
B. Finalize Configuration/Setup
C. Transition to Support
D. Go-live
Answer: A D

certification Microsoft   MB5-858   MB5-858   MB5-858

NO.8 Your customer wants to ensure their business software does not contain undocumented code. What
can you do to ensure your team will not deliver undocumented code?
A. Explain that this demand complies with your company's strategy, and state that developers must
produce
documented code that is easily read and understood.
B. Invite your customer to work with your development team to create code development standards.
C. Share requirements and design documents from previous projects to demonstrate that
documentation is
a priority in your company.
D. List this demand as a formal project requirement.
Answer: B

Microsoft   MB5-858   certification MB5-858

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft MB5-858 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft MB5-858.

Le dernier examen Microsoft 70-515 gratuit Télécharger

Il demande les connaissances professionnelles pour passer le test Microsoft 70-515. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Microsoft 70-515, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Microsoft 70-515. Cet outil de formation est convenable pour les candidats de test Microsoft 70-515. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Le test Microsoft 70-515 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Microsoft 70-515. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft 70-515.

Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Microsoft 70-515.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 70-515 juste avec la Q&A de Microsoft 70-515 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Code d'Examen: 70-515
Nom d'Examen: Microsoft (TS: Web Applications Development with Microsoft .NET Framework 4)
Questions et réponses: 186 Q&As

70-515 Démo gratuit à télécharger: http://www.pass4test.fr/70-515.html

NO.1 .You are developing an ASP.NET MVC 2 Web application. A page makes an AJAX request and
expects a list of company names in the following format. ["Adventure Works","Contoso"] You need to write
an action method that returns the response in the correct format.
Which type should you return from the action method?
A. AjaxHelper
B. XDocument
C. JsonResult
D. DataContractJsonSerializer
Answer: C

Microsoft   certification 70-515   70-515

NO.2 You create a new ASP.NET MVC 2 Web application. The following default routes are created in the
Global.asax.vb file. (Line numbers are included for reference only.)
01 Shared Sub RegisterRoutes(ByVal routes As RouteCollection)
02
03 routes.IgnoreRoute("{resource}.axd/{*pathInfo}")
04
05 routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "Index", .id = ""}
)
06 End Sub
You implement a controller named HomeController that includes methods with the following signatures.
Function Index() As ActionResult
Function Details(ByVal id As Integer) As ActionResult
Function DetailsByUsername(
ByVal username As String) As ActionResult
You need to add a route to meet the following requirements.
The details for a user must be displayed when a user name is entered as the path by invoking the
DetailsByUsername action.
User names can contain alphanumeric characters and underscores, and can be between 3 and 20
characters long.
What should you do?
A. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "DetailsByUsername",
.id = ""}
)
B. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{username}",
New With {.controller = "Home", .action = "DetailsByUsername",
.username = ""},
New With {.username = "\w{3,20}"}
)
C. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{username}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.username = "\w{3,20}"}
)
D. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{id}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.id = "\w{3,20}"}
)
Answer: C

Microsoft examen   certification 70-515   70-515 examen   70-515 examen

NO.3 You are developing an ASP.NET Web application. You create a master page. The master page requires
a region where you can add page-specific content by using the ASP.NET page designer.
You need to add a control to the master page to define the region.
Which control should you add?
A. Content
B. ContentPlaceHolder
C. PlaceHolder
D. Substitution
Answer: B

Microsoft   70-515   70-515   certification 70-515

NO.4 You are creating an ASP.NET Web site. You create a HTTP module named Custom Module, and you
register the module in the web.config file. The Custom Module class contains the following code.
Public Class Custom Module
Implements IHttpModule
Dim footerContent As String = "<div>Footer Content</div>"
Public Sub Dispose() Implements IHttpModule.Dispose
End Sub
End Class
You need to add code to CustomModule to append the footer content to each processed ASP.NET page.
Which code segment should you use?
A. Public Sub New(ByVal app As HttpApplication)
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
B. Public Sub Init(ByVal app As HttpApplication) _
Implements IHttpModule.Init
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = New HttpApplication()
app.Response.Write(footerContent)
End Sub
C. Public Sub New()
Dim app As HttpApplication = New HttpApplication()
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
D. Public Sub Init(ByVal app As HttpApplication) _
Implements IHttpModule.Init
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
Answer: D

Microsoft examen   70-515   certification 70-515   70-515

NO.5 You are developing an ASP.NET Web application.
Application data is stored in a Microsoft SQL Server 2008 database. You configure a connection string
named cnnContoso. The application must cache the data that is returned from the database by using this
connection string.
You need to ensure that the application checks the database every 10 seconds.
What should you do?
A. Add the following configuration to the <system.web> section of the web.config file.
<caching>
<outputCacheSettings>
<outputCacheProfiles>
<add name="cnnContoso"
duration="10" />
</outputCacheProfiles>
</outputCacheSettings>
</caching>
B. Add the following configuration to the <system.web> section of the web.config file.
<caching>
<sqlCacheDependency enabled="true" pollTime="10000">
<databases>
<add name="ContosoDatabase"
connectionStringName="cnnContoso" />
</databases>
</sqlCacheDependency>
</caching>
C. Add the following @ Page directive to pages that query the database.
<%@ OutputCache Duration="10"
VaryByParam="cnnContoso" %>
D. Add the following @ Page directive to pages that query the database.
<%@ OutputCache Duration="10000"
VaryByParam="cnnContoso" %>
Answer: B

Microsoft examen   certification 70-515   70-515 examen   70-515 examen

NO.6 You are creating an ASP.NET Web site. The site has a master page named Custom.master. The
code-behind file for Custom.master contains the following code segment.
Partial Public Class Custom
Inherits System.Web.UI.MasterPage
Public Property Region As String
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
End Sub
End Class
You create a new ASP.NET page and specify Custom.master as its master page.
You add a Label control named lblRegion to the new page.
You need to display the value of the master pages Region property in lblRegion.
What should you do?
A. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Parent
lblRegion.Text = custom.Region
B. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Master
lblRegion.Text = custom.Region
C. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Page.FindControl("lblRegion")
lblRegion.Text = Me.Region
D. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Master.FindControl("lblRegion")
lblRegion.Text = Me.Region
Answer: B

Microsoft   70-515   70-515   certification 70-515

NO.7 You are implementing an ASP.NET MVC 2 Web application that contains several folders.
The Views/Shared/DisplayTemplates folder contains a templated helper named Score.ascx that performs
custom formatting of integer values.
The Models folder contains a class named Player with the following definition.
Public Class Player
Public Property Name As String
Public Property LastScore As Integer
Public Property HighScore As Integer
End Class
You need to ensure that the custom formatting is applied to LastScore values when the
HtmlHelper.DisplayForModel method is called for any view in the application that has a model of type
Player.
What should you do?
A. Rename Score.ascx to LastScore.ascx.
B. Move Score.ascx from the Views/Shared/DisplayTemplates folder to the
Views/Player/DisplayTemplates folder.
C. Add the following attribute to the LastScore property.
<UIHint("Score")>
D. Add the following attribute to the LastScore property.
<Display(Name:="LastScore", ShortName:="Score")>
Answer: C

Microsoft   certification 70-515   certification 70-515   certification 70-515

NO.8 You are implementing an ASP.NET Web site that will be accessed by an international audience. The site
contains global and local resources for display elements that must be translated into the language that is
selected by the user. You need to ensure that the Label control named lblCompany displays text in the
users selected language from the global resource file. Which control markup should you use?
A. <asp:Label ID="lblCompany" runat="server"
meta:resourcekey="lblCompany" />
B. <asp:Label ID="lblCompany" runat="server"
Text="meta:lblCompany.Text" />
C. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:lblCompanyText %>" />
D. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:WebResources, lblCompanyText %>" />
Answer: D

certification Microsoft   70-515 examen   70-515   70-515 examen

NO.9 You create an ASP.NET page named TestPage.aspx that contains validation controls. You need to verify
that all input values submitted by the user have been validated by testing the Page.IsValid property.
Which page event should you add an event handler to?
A. Init
B. Load
C. PreInit
D. PreLoad
Answer: B

Microsoft examen   70-515   70-515

NO.10 You are implementing an ASP.NET Web application. Users will authenticate to the application with an
ID. The application will allow new users to register for an account. The application will generate an ID for
the user based on the users full name. You need to implement this registration functionality.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Configure the SqlMembershipProvider in the web.config file.
B. Configure the SqlProfileProvider in the web.config file.
C. Create an ASP.NET page that contains a default CreateUserWizard control to create a new user
account.
D. Create an ASP.NET page that contains a custom form that collects the user information and then uses
the Membership.CreateUser method to create a new user account.
Answer: A, D

Microsoft examen   certification 70-515   70-515 examen

NO.11 You are troubleshooting an ASP.NET Web application. System administrators have recently expanded
your web farm from one to two servers. Users are periodically reporting an error message about invalid
view state. You need to fix the problem.
What should you do?
A. Set viewStateEncryptionMode to Auto in web.config on both servers.
B. Set the machineKey in machine.config to the same value on both servers.
C. Change the session state mode to SQLServer on both servers and ensure both servers use the same
connection string.
D. Override the SavePageStateToPersistenceMedium and LoadPageStateFromPersistenceMedium
methods in the page base class to serialize the view state to a local web server file.
Answer: B

Microsoft   70-515 examen   certification 70-515   70-515   70-515   certification 70-515

NO.12 You are developing an ASP.NET Web page that contains input controls, validation controls, and a button
named btnSubmit.
The page has the following code-behind. (Line numbers are included for reference only.)
01 Public Class _Default
02 Inherits System.Web.UI.Page
03
04 Protected Sub SaveToDatabase()
05
06 End Sub
07
08 Protected Sub btnSubmit_Click(ByVal sender As Object,
09 ByVal e As EventArgs) Handles btnSubmit.Click
10
11 End Sub
12
13 End Class
You need to ensure that all data that is submitted passes validation before the data is saved in a
database.
What should you do?
A. Add the following method override.
Protected Overrides Sub OnInit(ByVal e As EventArgs)
MyBase.OnInit(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
B. Add the following method override.
Protected Overrides Sub OnLoad(ByVal e As EventArgs)
MyBase.OnLoad(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
C. Add the following method override.
Protected Overrides Sub OnPreRender(ByVal e As EventArgs)
MyBase.OnPreRender(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
D. Add the following code segment at line 10.
If (Page.IsValid) Then Me.SaveToDatabase()
Answer: D

Microsoft   70-515   certification 70-515

NO.13 You have created an ASP.NET server control named Shopping Cart for use by other developers. Some
developers report that the Shopping Cart control does not function properly with ViewState disabled. You
want to ensure that all instances of the Shopping Cart control work even if View State is disabled.
What should you do.?
A. Require developers to set EnableViewStateMac to true.
B. Store state in ControlState instead of ViewState.
C. Serialize the state into an Application state entry called "MyControl".
D. Require developers to change the session state mode to SQLServer.
Answer: B

Microsoft   70-515   70-515   70-515

NO.14 You are implementing an ASP.NET MVC 2 application. In the Areas folder, you add a subfolder named
Product to create a single project areA.
You add files named ProductController.vb and Index.aspx to the appropriate subfolders.
You then add a file named Route.vb to the Product folder that contains the following code. (Line numbers
are included for reference only.)
01 Public Class Route
Inherits AreaRegistration
02
03 Public Overrides ReadOnly Property AreaName As String
04 Get
05 Return "product"
06 End Get
07 End Property
08
09 Public Overrides Sub RegisterArea(
ByVal context As AreaRegistrationContext)
10
11 context.MapRoute("product_default",
"product/{controller}/{action}/{id}",
New With {.controller = "Product", .action = "Index",
.id = ""})
12
13 End Sub
End Class
When you load the URL http://<applicationname>/product, you discover that the correct page is not
returned.
You need to ensure that the correct page is returned.
What should you do?
A. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}/{controller}/{action}/{id}",
New With {.area = "product", .controller = "Product",
.action = "Index", .id = ""})
B. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}",
New With {.controller = "Product", .action = "Index", .id = ""})
C. Add the following code segment at line 12.
AreaRegistration.RegisterAllAreas()
D. Add the following code segment to the RegisterRoutes method in the Global.asax.vb file.
AreaRegistration.RegisterAllAreas()
Answer: A

certification Microsoft   70-515   70-515   70-515   70-515

NO.15 You are implementing an ASP. NET MVC 2 Web application. You add a controller named Company
Controller.
You need to modify the application to handle the URL path /company/info.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following method to the CompanyController class.
Function Info () As ActionResult
Return View()
End Function
B. Add the following method to the CompanyController class.
Function Company_Info() As ActionResult
Return View()
End Function
C. Right-click the Views folder, and select View from the Add submenu to create the view for the action.
D. Right-click inside the action method in the CompanyController class, and select Add View to create a
view for the action.
Answer: A, D

Microsoft examen   70-515 examen   70-515

NO.16 You are implementing an ASP.NET MVC 2 Web application that contains the following class.
Public Class DepartmentController
Inherits Controller
Shared departments As List(Of Department) =
New List(Of Department)
Function Index() As ActionResult
Return View(departments)
End Function
Function Details(ByVal id As Integer) As ActionResult
Return View(departments.Find(Function(x) x.ID = id))
End Function
Function ListEmployees(ByVal d As Department) As ActionResult
Dim employees As List(Of Employee) = GetEmployees(d)
Return View (employees)
End Function
End Class
You create a strongly typed view that displays details for a Department instance. You want the view to also
include a listing of department employees.
You need to write a code segment that will call the ListEmployees action method and output the results in
place.
Which code segment should you use?
A. <%= Html.Action("ListEmployees", Model) %>
B. <%= Html.ActionLink("ListEmployees", "Department",
"DepartmentController") %>
C. <% Html.RenderPartial("ListEmployees", Model) %>
D. <%= Html.DisplayForModel("ListEmployees") %>
Answer: A

Microsoft   certification 70-515   70-515   70-515   70-515 examen

NO.17 You are developing an ASP.NET MVC 2 Web application. The application contains a controller named
Home Controller, which has an action named Index. The application also contains a separate area named
Blog. A view within the Blog area must contain an Action Link that will link to the Index action of the Home
Controller. You need to ensure that the Action Link in the Blog area links to the Index action of the
HomeController.
Which Action Link should you use?
A. Html.ActionLink("Home", "Index", "Home")
B. Html.ActionLink("Home", "Index", "Home", New With {.area = ""}, Nothing)
C. Html.ActionLink("Home", "Index", "Home", New With {.area = "Blog"}, Nothing)
D. Html.ActionLink("Home", "Index", "Home", New With {.area = "Home"}, Nothing)
Answer: B

Microsoft   certification 70-515   70-515   70-515 examen

NO.18 You are implementing an ASP.NET application that includes a page named TestPage.aspx.
TestPage.aspx uses a master page named TestMaster.master.
You add the following code to the TestPage.aspx code-behind file to read a TestMaster.master public
property named CityName.
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
Dim s As String = Master.CityName
End Sub
You need to ensure that TestPage.aspx can access the CityName property. What should you do?
A. Add the following directive to TestPage.aspx.
<%@ MasterType VirtualPath="~/TestMaster.master" %>
B. Add the following directive to TestPage.aspx.
<%@ PreviousPageType VirtualPath="~/TestMaster.master" %>
C. Set the Strict attribute in the @ Master directive of the TestMaster.master page to true.
D. Set the Explicit attribute in the @ Master directive of the TestMaster.master page to true.
Answer: A

Microsoft   certification 70-515   certification 70-515   70-515

NO.19 You are implementing an ASP.NET application that uses data-bound GridView controls in multiple
pages. You add JavaScript code to periodically update specific types of data items in these GridView
controls.
You need to ensure that the JavaScript code can locate the HTML elements created for each row in these
GridView controls, without needing to be changed if the controls are moved from one page to another.
What should you do?
A. Replace the GridView control with a ListView control.
B. Set the ClientIDMode attribute to Predictable in the web.config file.
C. Set the ClientIDRowSuffix attribute of each unique GridView control to a different value.
D. Set the @ OutputCache directives VaryByControl attribute to the ID of the GridView control.
Answer: B

Microsoft examen   certification 70-515   certification 70-515   70-515 examen

NO.20 You are implementing an ASP.NET Web site. The root directory of the site contains a page named
Error.aspx. You need to display the Error.aspx page if an unhandled error occurs on any page within the
site. You also must ensure that the original URL in the browser is not changed.
What should you do?
A. Add the following configuration to the web.config file.
<system.web>
<customErrors mode="On">
<error statusCode="500" redirect="~/Error.aspx" />
</customErrors>
</system.web
B. Add the following configuration to the web.config file.
<system.web>
<customErrors redirectMode="ResponseRewrite"
mode="On" defaultRedirect="~/Error.aspx" />
</system.web>
C. Add the following code segment to the Global.asax file.
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
Response.Redirect("~/Error.aspx")
End Sub
D. Add the following code segment to the Global.asax file.
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
Server.Transfer("~/Error.aspx")
End Sub
Answer: B

Microsoft examen   70-515 examen   70-515   certification 70-515

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft 70-515, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.