C'est sûr que le Certificat Alcatel-Lucent 4A0-101 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Alcatel-Lucent 4A0-101, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Alcatel-Lucent 4A0-101 peut bien tester la professionnalité de IT.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Alcatel-Lucent 4A0-101 est une bonne examination. Mais c'est difficile à passer le test Alcatel-Lucent 4A0-101. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Alcatel-Lucent 4A0-101. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Alcatel-Lucent 4A0-101. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Alcatel-Lucent 4A0-101. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 4A0-101, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Alcatel-Lucent 4A0-101. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Dépenser assez de temps et d'argent pour réussir le test Alcatel-Lucent 4A0-101 ne peut pas vous assurer à passer le test Alcatel-Lucent 4A0-101 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Code d'Examen: 4A0-101
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
Questions et réponses: 177 Q&As
4A0-101 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-101.html
NO.1 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 examen 4A0-101
NO.2 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes
down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello
timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to
their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is
down. At this point, both routers R1 and R2 re-compute their link statedatabase and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
certification Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101
NO.3 Click the exhibit button.
A static route is created on router R1 using the "static-route 0.0.0.0/0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 examen 4A0-101 examen
NO.4 What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 examen certification 4A0-101 4A0-101
NO.5 Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose
three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer: A,B,D
Alcatel-Lucent 4A0-101 4A0-101 examen 4A0-101 examen 4A0-101 examen
NO.6 Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment;
however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the
other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.3.
Answer: B
Alcatel-Lucent examen 4A0-101 4A0-101 examen 4A0-101
NO.7 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent 4A0-101 examen certification 4A0-101 4A0-101 4A0-101 examen
NO.8 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many
type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 examen 4A0-101
NO.9 Click the exhibit button.
The following command sequence is executed on router R2:
A:R2# configure router ospf router-id 10.10.10.99
A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 examen certification 4A0-101
NO.10 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router
static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this
static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
certification Alcatel-Lucent 4A0-101 4A0-101 examen
NO.11 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent examen certification 4A0-101 4A0-101
NO.12 Which of the following commands can be used to display the number of SPF computations that have
been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
certification Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101 examen
NO.13 When a router receives an IP packet, but does not find a match in the routing table for the destination IP
address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent examen 4A0-101 4A0-101 examen 4A0-101 4A0-101
NO.14 Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C
Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101 4A0-101 4A0-101
NO.15 Static routing will be used in a network between a corporate head office, with many connected networks,
and a branch office, with one connection to the head office. Which of the following best describes the
likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific
static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will
have a default route.
Answer: D
certification Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101 4A0-101
NO.16 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that
there are no stub networks, which of the following statements regarding type 4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that
is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101 4A0-101
NO.17 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101 4A0-101
NO.18 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the
network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent 4A0-101 certification 4A0-101
NO.19 Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1
advertises all directly connected networks, how will these networks be represented in router R3's routing
table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer: C
certification Alcatel-Lucent certification 4A0-101 4A0-101 4A0-101
NO.20 Which of the following statements regarding distance vectors protocols are true.?
(Choose two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the
immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers
and how they interconnect
Answer: A
Alcatel-Lucent examen 4A0-101 4A0-101 examen 4A0-101 certification 4A0-101
La Q&A Alcatel-Lucent 4A0-101 de Pass4Test est liée bien avec le test réel de Alcatel-Lucent 4A0-101. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Alcatel-Lucent 4A0-101 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
没有评论:
发表评论