Le dernier examen HP HP0-J39 gratuit Télécharger

On doit faire un bon choix pour passer le test HP HP0-J39. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification HP HP0-J39 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Le test HP HP0-J39 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Pass4Test est un catalyseur de votre succès de test HP HP0-J39. En visant la Certification de HP, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test HP HP0-J39, la Q&A HP HP0-J39 est un bon choix pour vous.

Code d'Examen: HP0-J39

Nom d'Examen: HP (Designing and Implementing HP P4000 SAN Solutions)

Questions et réponses: 145 Q&As

HP0-J39 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J39.html

NO.1 What are the correct steps to create a remote copy on a P4000 G2?
A. Create the remote volume and link it to the primary volume, copy the data.
B. Create the primary volume, create the remote volume and link it to the primary volume, copy the data.
C. Create the remote volume andsnapshot, link the primary volume to the remote snapshot, copy the
data.
D. Create the primary snapshot, create the remote volume and snapshot, link it to the primary
snapshot,copy the data.
Answer: D

HP   HP0-J39 examen   certification HP0-J39   certification HP0-J39

NO.2 What is the recommended network latency on a multi-site SAN subnet?
A. below 2 ms
B. below 5 ms
C. below 9 ms
D. below 15 ms
Answer: A

HP   HP0-J39 examen   HP0-J39   HP0-J39 examen   HP0-J39   HP0-J39 examen

NO.3 A design consists of an HP P4000 SAN solution installed across four sites. How many servers running
the central management console are required to manage the solution?
A. 8
B. 4
C. 2
D. 1
Answer: D

HP   HP0-J39   HP0-J39

NO.4 What is a major enhancement of SAN/iQ 8.5 over SAN/iQ 8.1?
A. Network RAID 1 and 10
B. Network RAID 5 and 6
C. application-managed snapshots
D. thin provisionedSmartClone
Answer: B

HP   HP0-J39   HP0-J39 examen

NO.5 Which HBA and iSCSI initiator combination does the iSCSI protocol support? (Select two.)
A. iSCSI HBA with TCP offload engine (TOE)
B. softwareiSCSI initiator with Fibre Channel HBA
C. softwareiSCSI initiator with InfiniBand HBA
D. iSCSI Fibre Channel HBA with TCP TOE software iSCSI initiator
E. softwareiSCSI initiator with NIC
Answer: A,E

certification HP   HP0-J39   HP0-J39   HP0-J39

NO.6 Which operating systems does the HP P4000 SAN solution support? (Select three.)
A. Solaris 9
B. OS X Leopard 10.5.5
C. HP OpenVMS 8.3
D. Novell NetWare 6.5
E. SUSE Linux Enterprise Server 10
Answer: B,D,E

HP examen   HP0-J39   HP0-J39   certification HP0-J39

NO.7 What are characteristics of device specific module MPIO (DSM MPIO)? (Select two.)
A. DSM MPIO redirectsiSCSI communication to the least busy storage node.
B. DSM MPIO communication offers better performance than non-DSM MPIO communication.
C. DSM MPIO is available for all operating systems withiSCSI support.
D. DSM MPIO provides the servers with the data mapping of each node.
E. DSM MPIO provides a set of built-in data transport security features.
Answer: B,D

HP examen   certification HP0-J39   HP0-J39   HP0-J39

NO.8 Which instance is responsible for access control?
A. cluster
B. server
C. management group
D. volume
Answer: B

HP examen   HP0-J39   HP0-J39 examen   HP0-J39   HP0-J39   HP0-J39

NO.9 How does the HP P4000 SAN solution allow aggregate application performance to be increased when
capacity is added?
A. Capacity and performance are adjusted on a linear scale.
B. Application priority can be adjusted.
C. Capacity and performance are dynamically adjusted to maintain balance.
D. Capacity and performance are balanced through the configuration of expansion modules.
Answer: A

certification HP   HP0-J39   certification HP0-J39   HP0-J39 examen   HP0-J39

NO.10 What are potential purposes to utilize snapshots? (Select two.)
A. to restore files without tape or backup software
B. to protect against unintended manual data deletion
C. to protect against disk failures
D. to protect against multiple hardware failures
E. to prevent sensitive data from modification
Answer: A,B

HP   certification HP0-J39   HP0-J39 examen   HP0-J39   HP0-J39

NO.11 Which statements about HP P4000 SAN Network RAID levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The Network RAID level is defined per storage node.
F. The number of storage nodes in the cluster can limit the Network RAID level.
Answer: B,D,F

HP   certification HP0-J39   certification HP0-J39

NO.12 Click the Exhibit button. Which network protocol should be enabled when using ProCurve switches in an
iSCSI storage network?
A. Mesh Protocol
B. Simple Loop Prevention Protocol
C. Rapid Spanning Tree Protocol
D. Point-to-Point Protocol
Answer: C

certification HP   HP0-J39 examen   HP0-J39   HP0-J39   HP0-J39

NO.13 Which benefit does a virtual IP load balancing (VIPLB) initiator provide?
A. directsiSCSI communication to the least busy storage module
B. supports simultaneousiSCSI communication with multiple storage modules
C. selects the next storage module in the list foriSCSI communication
D. prefers the fastest connection foriSCSI communication
Answer: A

HP   certification HP0-J39   HP0-J39

NO.14 At which level in HP P4000 SAN solutions is RAID configured?
A. storage node
B. volume
C. management group
D. cluster
Answer: A

certification HP   HP0-J39   HP0-J39   certification HP0-J39   certification HP0-J39

NO.15 Which statements about remote copies are correct? (Select two.)
A. Remote copiescan not be mounted.
B. Remote copies are always thin provisioned.
C. Remote copies are asynchronous replicas of a volume.
D. Remote copies can be synchronous and asynchronous.
E. Remote copies are asynchronous replicas between different clusters.
Answer: B,C

certification HP   certification HP0-J39   HP0-J39   HP0-J39 examen

Pass4Test peut offrir nombreux de documentations aux candidats de test HP HP0-J39, et aider les candidats à réussir le test. Les marétiaux visés au test HP HP0-J39 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test HP HP0-J39 100%.