En quelques années, le test de certification de Juniper JN0-201 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Juniper JN0-201? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification JN0-201. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification JN0-201, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
Si vous voulez ne se soucier plus à passer le test Juniper JN0-201, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Juniper JN0-201. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Juniper JN0-201 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Code d'Examen: JN0-201
Nom d'Examen: Juniper (Juniper networks Certified internet associate.m(jncia-m))
Questions et réponses: 120 Q&As
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Juniper JN0-201 à se preuver. Mais le taux du succès et bien bas. Participer le test Juniper JN0-201 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Choisir le Pass4Test vous permet non seulement à réussir le test Juniper JN0-201, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A Juniper JN0-201 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
Vous n'avez besoin que de faire les exercices à propos du test Juniper JN0-201 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
JN0-201 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-201.html
NO.1 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 examen JN0-201 JN0-201 JN0-201 examen
NO.2 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper certification JN0-201 JN0-201 JN0-201 examen
NO.3 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
Juniper certification JN0-201 JN0-201 JN0-201 JN0-201 examen
NO.4 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper JN0-201 certification JN0-201 JN0-201 examen
NO.5 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
certification Juniper JN0-201 examen certification JN0-201 JN0-201 examen
NO.6 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper certification JN0-201 certification JN0-201 JN0-201 JN0-201
NO.7 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper certification JN0-201 JN0-201 JN0-201 JN0-201
NO.8 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
certification Juniper certification JN0-201 JN0-201 examen JN0-201 examen JN0-201
NO.9 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
certification Juniper JN0-201 JN0-201
NO.10 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper JN0-201 JN0-201 examen JN0-201 certification JN0-201
NO.11 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper JN0-201 JN0-201
NO.12 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper examen JN0-201 JN0-201 examen
NO.13 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
Juniper JN0-201 JN0-201 certification JN0-201
NO.14 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper examen certification JN0-201 certification JN0-201 JN0-201
NO.15 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper certification JN0-201 JN0-201 JN0-201
NO.16 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
certification Juniper JN0-201 JN0-201 JN0-201
NO.17 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper JN0-201 certification JN0-201 certification JN0-201 JN0-201
NO.18 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
certification Juniper JN0-201 examen JN0-201 examen JN0-201 JN0-201
NO.19 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
certification Juniper JN0-201 certification JN0-201
NO.20 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
certification Juniper certification JN0-201 certification JN0-201 JN0-201 JN0-201 examen JN0-201
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Juniper JN0-201. Le guide d'étude de Pass4Test comprend les excercices de Juniper JN0-201 et la Q&A qui peut vous permetrre à réussir 100% le test Juniper JN0-201. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
没有评论:
发表评论